08055A104K4T2A Datasheet, PDF (1/5 Pages) AVX Corporation – Automotive MLCC

Automotive MLCC
Automotive
GENERAL DESCRIPTION
AVX Corporation has supported the Automotive Industry requirements for
Multilayer Ceramic Capacitors consistently for more than 10 years. Products
have been developed and tested specifically for automotive applications and
all manufacturing facilities are QS9000 and VDA 6.4 approved.
As part of our sustained investment in capacity and state of the art
technology, we are now transitioning from the established Pd/Ag electrode
system to a Base Metal Electrode system (BME).
AVX is using AECQ200 as the qualification vehicle for this transition. A
detailed qualification package is available on request and contains results on
a range of part numbers including:
• X7R dielectric components containing BME electrode and copper
terminations with a Ni/Sn plated overcoat.
• X7R dielectric components, BME electrode with epoxy finish for conduc-
tive glue mounting.
• X7R dielectric components BME electrode and soft terminations with a
Ni/Sn plated overcoat.
• NP0 dielectric components containing Pd/Ag electrode and silver termi-
nation with a Ni/Sn plated overcoat.
HOW TO ORDER
0805 5
A
104
K
4
T
2
A
Size
0603
0805
1206
1210
1812
Voltage
10V = Z
16V = Y
25V = 3
50V = 5
100V = 1
200V = 2
500V = 7
Dielectric
NP0 = A
X7R = C
X8R = F
Capacitance
Code (In pF)
2 Significant
Digits + Number
of Zeros
e.g. 10µF = 106
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
Failure Rate
4 = Automotive
Terminations
T = Plated Ni and Sn
Z = FLEXITERM^TM
U = Conductive Epoxy
Packaging
2 = 7" Reel
4 = 13" Reel
Special Code
A = Std. Product
NOTE: Contact factory for non-specified capacitance values.
COMMERCIAL VS AUTOMOTIVE MLCC PROCESS COMPARISON
Administrative
Commercial
Standard Part Numbers.
No restriction on who purchases these parts.
Automotive
Specific Automotive Part Number. Used to control
supply of product to Automotive customers.
Design
Minimum ceramic thickness of 0.020"
Minimum Ceramic thickness of 0.029" (0.74mm)
on all X7R product.
Dicing
Side & End Margins = 0.003" min
Side & End Margins = 0.004" min
Cover Layers = 0.005" min
Lot Qualification
(Destructive Physical
Analysis - DPA)
As per EIA RS469
Increased sample plan –
stricter criteria.
Visual/Cosmetic Quality Standard process and inspection
100% inspection
Application Robustness
Standard sampling for accelerated
wave solder on X7R dielectrics
All Tests have Accept/Reject Criteria 0/1
Increased sampling for accelerated wave solder on
X7R and NP0 followed by lot by lot reliability testing.
35