009162006206175 Datasheet, PDF (1/4 Pages) AVX Corporation – 9162 Slide-In SIM Card Connector

9162 Slide-In SIM Card Connector
GENERAL DESCRIPTION
The standard SIM connector is specifically designed for handheld devices
requiring secure subscriber identification.
Following on from the introduction of our standard SIM block with an offering
of 3 standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding
another standard to the 9162 series SIM connectors, the slide-in SIM.
Unlike SIM blocks which require SIM card guides to aid insertion, removal and
retention of the SIM card, the slide-in SIM has guides as part of the connector
mold design.
Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles.
Our contact design is specifically rounded to avoid any possible damage
during and after card insertion to the card itself, assuming normal use. The
design also incorporates protection features to avoid contact damage during
this operation such as contact snagging.
Please contact the appropriate sales office for further details of this service.
KEY FEATURES AND BENEFITS
• Produced for use with mini SIM cards.
• The insulator is molded from high temperature plastic enabling the
connector to be used in convection or infrared soldering processes.
• Supplied on tape and reel packaging for pick and place assembly.
• The all plastic design, assuming normal use prevents damage to the
SIM card on insertion.
• Optional SMT contact size:
Standard SMT contact size – 1.60mm x 1.60mm
Narrow SMT contact size – 1.05mm x 0.60mm
• RoHS Compliant available.
Standard SMT Contact Layout
13.0 (0.512)
11.2 (0.441)
10.46 (0.412)
8.66 (0.341)
7.92 (0.312)
6.12 (0.241)
Narrow SMT Contact Layout
12.6 (0.496)
11.6 (0.457)
10.06 (0.396)
9.06 (0.357)
7.52 (0.296)
6.52 (0.257)
15.7
(0.618)
16.4 (0.646)
10.36
(0.408)
12.16
1.74 _(0.479)
(0.069)
0.06
(0.002)
15.7
(0.618)
16.4 (0.646)
10.35
(0.407)
11.85
1.75 _(0.467)
(0.069)
0.25
(0.010)
17