00-9176-002-001-106 Datasheet, PDF (1/9 Pages) AVX Corporation – Discrete Wire IDC

Discrete Wire IDC
Series 9176
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter
ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10
amp current rating with two large SMT solder tails per wire to provide maximum
stability on the PCB. Available in 1p-3p configuration, these connectors can be
end stackable for higher pin counts. The 9176 series also comes with optional
locking strain relief caps that act as the termination tool for severe vibration
applications.
APPLICATIONS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application Notes: refer to 201-01-124
FEATURES AND BENEFITS
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Connector housing captures the wire insulation for positive strain relief
• Tested to automotive levels on shock, vibration and temperature cycling for
reliability
• Low and high volume assembly tools to match production volumes
• Reduced total applied cost versus solder or crimp processes
• Optional thru and end caps lock in place to provide maximum strain relief
• High temperature insulator capable to 260ºC reflow soldering processes
ELECTRICAL
• Current Rating: 10 Amp / Contact
• Voltage Rating: 250 VAC
HOW TO ORDER
00 9176
00X
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
00X
MECHANICAL
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
X
06
Prefix
Series
Number of Ways
Code
No of
Ways
Details
001 1 Page 11
002 2 Page 12
003 3 Page 13
Wire Gauge Size
Code Accepted
Wire Cap Code
Wire Gauge Insulation Pages 13-14
001
18 Gauge
Solid or Stranded
Ø 1.6-2.1
021
011
20 Gauge Stranded
Solid or Stranded
Ø 1.6-2.1
021
022
22 Gauge Stranded
Solid or Stranded
Ø 1.1-1.6
016
032
24 Gauge Stranded
Solid or Stranded
Ø 1.1-1.6
016
Color/Approval
Code Color Approval
0 Black Special Order
1 White Standard
9 White UL Approved
Plating
Option
06 = Pure Tin
all over
Certification: UL File # E320991, check UL conditions of use for specific ratings and details
9