|
AL4CX263 Datasheet, PDF (1/2 Pages) AverLogic Technologies Inc – 16K/32K/64K/128K x9, 8K/16K/32K/64K x18 Synchronous FIFO | |||
|
AL4CX263/AL4CX273/
AL4CX283/ AL4CX293
16K/32K/64K/128K x9, 8K/16K/32K/64K x18
Synchronous FIFO
Applications
- ATM switches
- Routers
- Cable modems
- Wireless base stations
- SONET(Synchronous Optical Network)
multiplexers
- Multimedia systems
- TBC(Time Base Corrector)
- Hard Disk cache memory
- Buffer for Communications
Description
The AL4CX263/AL4CX273/AL4CX283/
AL4CX293 FIFO (First In First Out) memory
provides completely independent 18bit bus
width input and output port operation with
flexible x18/ x9 Bus-Matching data flow
control at a maximum speed of 166 Mhz. The
products are available in densities from
128Kbit to 1Mbit. Additional features of the
AL4CX2x3 series include: fixed and
programmable flags; low first word latency;
partial reset; Endian select; expandable
depth/width.
The embedded memory array with built-in
address decoder, pointer manager and state-
of-the-art circuits provide an easy-to-use
interface to serial read/write memory and offer
a flexible way to manage memory in the
system design.
Features
⢠8,192 x 18/16, 384 x 9-bit (AL4CX263)
⢠16,384 x 18/32, 768 x 9-bit (AL4CX273)
⢠32,768 x 18/65, 536 x 9-bit (AL4CX283)
⢠65,536 x 18/131, 072 x 9-bit (AL4CX293)
⢠Maximum 166 MHz Operation
⢠6 ns read/write cycle time
⢠Independent Read and Write operations
Standard or First Word Fall Through mode
⢠Bus-Matching and Endian selection
⢠Empty, Full, Half-Full and Programmable
Almost-Empty, Almost-Full Flags
⢠Depth and width expandable
⢠Output enable (data skipping)
⢠Master Reset clears entire FIFO
⢠Partial Reset, clears data
⢠Zero Latency Retransmit
⢠3.3V power supply with 5V tolerant inputs
⢠Available in a 80-pin thin quad flat pack
(TQFP)
Ordering Information
Part number AL4CX263, AL4CX273,
AL4CX283, AL4CX293
Package
80-pin plastic TQFP
Power Supply
+3.3V± 10%
|
▷ |