HCPL-2200 Datasheet, PDF (9/13 Pages) Agilent(Hewlett-Packard) – Low Input Current Logic Gate Optocouplers

Switching Specifications (AC)
For 0°C ≤ T_A[1] ≤ 85°C, 4.5 V ≤ V_CC ≤ 20 V, 1.6 mA ≤ I_F(ON) ≤ 5 mA, 0.0 mA ≤ I_F(OFF) ≤ 0.1 mA.
All Typicals at T_A = 25°C, V_CC = 5 V, I_F(ON) = 3 mA unless otherwise specified.
Parameter
Sym. Min. Typ. Max. Units
Test Conditions
Propagation Delay Time to
t_PHL
Logic Low Output Level
210
ns Without Peaking Capacitor
160 300
With Peaking Capacitor
Propagation Delay Time to
t_PLH
Logic High Output Level
170
ns Without Peaking Capacitor
115 300
With Peaking Capacitor
Output Enable Time to
Logic High
t_PZH
25
ns
Output Enable Time to
Logic Low
t_PZL
28
ns
Output Disable Time from
t_PHZ
105
ns
Logic High
Output Disable Time from
t_PLZ
60
ns
Logic Low
Output Rise Time (10-90%)
t_r
Output Fall Time (90-10%)
t_f
55
ns
15
ns
Fig. Note
5, 6 4, 5
5, 6 4, 5
7, 9
7, 8
7, 9
7, 8
5, 10
5, 10
Parameter
Logic High
Common Mode
Transient
Immunity
Logic Low
Common Mode
Transient
Immunity
Sym.
|CM_H|
Device
HCPL-2200
Min.
1,000
|CM_L|
HCPL-2219
HCPL-2200
2,500
1,000
HCPL-2219 2,500
Units
V/µs
V/µs
V/µs
V/µs
Test Conditions
|V_CM| = 50 V
|V_CM| = 400 V
I_F = 1.6 mA
V_CC = 5 V
T_A = 25°C
|V_CM| = 50 V
|V_CM| = 400 V
V_F = 0 V
V_CC = 5 V
T_A = 25°C
Fig. Note
11 6
11 6
Package Characteristics
Parameter
Input-Output Momentary
Withstand Voltage*
Input-Output Resistance
Input-Output Capacitance
Sym. Min. Typ. Max. Units
Test Conditions
V_ISO 3750
R_I-O
10¹²
V rms
Ω
RH ≤50%, t = 1 min.,
T_A = 25°C
V_I-O = 500 VDC
C_I-O
0.6
pF f = 1 MHz, V_I-O = 0 VDC
Fig. Note
3, 8
3
3
*The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For
the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your equipment level safety specification
or Avago Application Note 1074 entitled “Optocoupler Input-Output Endurance Voltage,” publication number 5963-2203E.
9