HSMF-C15X Datasheet, PDF (8/8 Pages) AVAGO TECHNOLOGIES LIMITED – Bi-color Surface Mount Chip LEDs

4.00 (0.157)
DIM. A
(SEE TABLE 1)
DIM. B
(SEE TABLE 1)
2.00 ± 0.05
(0.079 ± 0.002)
4.00 (0.157)
1.50 (0.059)
CATHODE
DIM. C
(SEE TABLE 1)
1.75 (0.069)
0.20 ± 0.05
(0.008 ± 0.002)
3.50 ± 0.05
(0.138 ± 0.002)
8.00 ± 0.30
(0.315 ± 0.012)
USER FEED
DIRECTION
CARRIER TAPE
COVER TAPE
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
DIM. A
DIM. B
DIM. C
PART NUMBER ± 0.10 (0.004) ± 0.10 (0.004) ± 0.10 (0.004)
HSMF-C15x SERIES 3.52 (0.139) 3.02 (0.119) 1.40 (0.055)
Figure 11. Tape dimensions.
END
START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 12. Tape leader and trailer dimensions.
Notes:
1. All dimensions in millimeters (inches).
2. Tolerance is ±0.1 mm (±0.004 in.) unless otherwise specified.
Convective IR Reflow Soldering
For more information on IR reflow
soldering, refer to Application Note
1060, Surface Mounting SMT LED Indi-
cator Components.
Storage Condition:
5 to 30°C @ 60% RH max.
Baking is required under the
condition:
a)  Humidity Indicator Card is
>10% when read at 23 ± 5°C
b)  Device exposed to factory condi-
tions < 30°C/60% RH more than
672 hours.
Baking recommended condition:
60 ± 5°C for 20 hours.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0671EN
AV02-0427EN - February 20, 2008