English
Language : 

HLMP-EG10-WZ000 Datasheet, PDF (8/15 Pages) AVAGO TECHNOLOGIES LIMITED – T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps
◁
Absolute Maximum Ratings at TA = 25°C
DC Forward Current[1,2,3] ..................................................................................... 50 mA
Peak Pulsed Forward Current[2,3] .......................................................................100 mA
Average Forward Current[3] .................................................................................. 30 mA
Reverse Voltage (IR = 100 µA)........................................................................................ 5 V
LED Junction Temperature....................................................................................... 130°C
Operating Temperature..........................................................................-40°C to +100°C
Storage Temperature...............................................................................-40°C to +100°C
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents between 10
mA and 30 mA are recommended. For more information on recommended drive conditions,
please refer to Application Brief I-024.
3. Operating at currents below 1 mA is not recommended. Please contact your local representa-
tive for further information.
Electrical/Optical Characteristics at TA = 25°C
Parameter
Symbol
Min. Typ. Max. Units Test Conditions
Forward Voltage
  Amber (ld = 590 nm)
2.02
  Orange (ld = 605 nm)
VF
1.98 2.4
V
  Red-Orange (ld = 615 nm)
1.94
  Red (ld = 626 nm)
1.90
IF = 20 mA
Reverse Voltage
VR
5
20
V
IF = 100 µA
Peak Wavelength:
  Amber (ld = 590 nm)
592
  Orange (ld = 605 nm)
lPEAK
609
nm
  Red-Orange (ld = 615 nm)
621
  Red (ld = 626 nm)
635
Peak of Wavelength of
Spectral Distribution
at IF = 20 mA
Spectral Halfwidth
∆l1/2
17
nm
Speed of Response
ts
20
ns
Wavelength Width at
Spectral Distribution
1/2 Power Point at
IF = 20 mA
Exponential Time
Constant, e-t/ts
Capacitance
C
40
pF
VF = 0, f = 1 MHz
Thermal Resistance
RqJ-PIN
240
°C/W LED Junction-to-Cathode
Lead
Luminous Efficacy[1]
  Amber (ld = 590 nm)
  Orange (ld = 605 nm)
hv
  Red-Orange (ld = 615 nm)
  Red (ld = 626 nm)
480
370
lm/W
260
150
Emitted Luminous
Power/Emitted Radiant
Power
Luminous Flux
jv
Luminous Efficiency [2]
he
Amber
Orange
Red-Orange
Red
500 mlm IF = 20 mA
Emitted Luminous
12
lm/W Flux/Electrical Power
13
13
13
Note:
1. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/hv, where Iv is the luminous intensity in candelas and hv
is the luminous efficacy in lumens/watt.
2. he = jV / IF x VF, where jV is the emitted luminous flux, IF is electrical forward current and VF is the forward voltage.

 ▷