HCPL-0701-500E Datasheet, PDF (8/14 Pages) AVAGO TECHNOLOGIES LIMITED – Low Input Current, High Gain Optocouplers

IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics (HCNW139 and HCNW138)
Description
Symbol
Installation Classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤600 V rms
for rated mains voltage ≤1000 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
V_IORM
Input to Output Test Voltage, Method b*
V_PR = 1.875 x V_IORM, 100% Production Test with t_P = 1 sec,
V_PR
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a*
V_PR = 1.5 x V_IORM, Type and Sample Test,
t_P = 60 sec, Partial Discharge < 5 pC
Highest Allowable Overvoltage*
(Transient Overvoltage, t_ini = 10 sec)
Safety Limiting Values
(Maximum values allowed in the event of a failure,
also see Figure 11, Thermal Derating curve.)
Case Temperature
Current (Input Current IF, PS = 0)
Output Power
Insulation Resistance at TS^, VIO = 500 V
V_PR
V_IOTM
T_S
I_S,INPUT
P_S,OUTPUT
R_S
Characteristic
I-IV
I-III
55/100/21
2
1414
2652
2121
8000
175
400
700
> 10⁹
Units
V_peak
V_peak
V_peak
V_peak
°C
mA
mW

*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, IEC/EN/DIN EN 60747-5-2, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in applica-
tion.
8