6N136-020E Datasheet, PDF (8/16 Pages) AVAGO TECHNOLOGIES LIMITED – Single Channel, High Speed Optocouplers

IEC/EN/DIN EN 60747-5-5 Insulation Characteristics (OPTION 060 ONLY)*
Description
Symbol 8 Pin DIP SO-8
Unit
Installation classification per DIN VDE 0110, Table 1
for rated mains voltage ≤ 150 V_rms
for rated mains voltage ≤ 300 V_rms
for rated mains voltage ≤ 600 V_rms
Climatic Classification
I – IV
I – IV
I – IV
0/70/21
I – IV
I – IV
I – III
0/70/21
Pollution Degree (DIN VDE 0110/39)
2
2
Maximum Working Insulation Voltage
V_IORM
630
567
V_peak
Input to Output Test Voltage, Method b*
V_PR
V_IORM × 1.875 = V_PR, 100% Production Test with t_m=1 sec, Partial discharge < 5 pC
1181
1063
V_peak
Input to Output Test Voltage, Method a*
V_IORM × 1.6 = V_PR, Type and Sample Test, t_m=10 sec, Partial discharge < 5 pC
V_PR
1008
907
V_peak
Highest Allowable Overvoltage* (Transient Overvoltage t_ini = 60 sec)
V_IOTM
8000
6000
V_peak
Safety-limiting values – maximum values allowed in the event of a failure
Case Temperature
Input Current
Output Power
T_S
175
150
°C
I_{S, INPUT}
230
150
mA
P_{S, OUTPUT}
600
600
mW
Insulation Resistance at T_S, V_IO = 500 V
R_S
≥ 10⁹
≥ 10⁹
Ω
* Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics (HCNW135/6 OPTION 060 ONLY)*
Description
Symbol Characteristic
Unit
Installation classification per DIN VDE 0110, Table 1
for rated mains voltage ≤ 150 V_rms
for rated mains voltage ≤ 300 V_rms
for rated mains voltage ≤ 600 V_rms
for rated mains voltage ≤ 1000 V_rms
Climatic Classification
I – IV
I – IV
I – IV
I – III
0/70/21
Pollution Degree (DIN VDE 0110/39)
2
Maximum Working Insulation Voltage
V_IORM
1414
V_peak
Input to Output Test Voltage, Method b*
V_PR
2651
V_peak
V_IORM × 1.875 = V_PR, 100% Production Test with t_m=1 sec, Partial discharge < 5 pC
Input to Output Test Voltage, Method a*
V_PR
2262
V_peak
V_IORM × 1.6 = V_PR, Type and Sample Test, t_m=10 sec, Partial discharge < 5 pC
Highest Allowable Overvoltage* (Transient Overvoltage t_ini = 60 sec)
V_IOTM
8000
V_peak
Safety-limiting values – maximum values allowed in the event of a failure
Case Temperature
Input Current
Output Power
T_S
I_{S, INPUT}
P_{S, OUTPUT}
150
400
700
°C
mA
mW
Insulation Resistance at T_S, V_IO = 500 V
R_S
≥ 10⁹
Ω
* Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
8