VMMK-3413 Datasheet, PDF (7/8 Pages) AVAGO TECHNOLOGIES LIMITED – 25 - 45 GHz Directional Detector in SMT Package

S Parameter Measurements
The S-parameters are measured on a 0.016 inch thick
RO4003 printed circuit test board, using 300 mm G-S-G
(ground signal ground) probes. Coplanar waveguide is
used to provide a smooth transition form the probes to
the device under test. The presence of the ground plane
on top of the test board results in excellent grounding
at the device under test. A combination of SOLT (Short –
Open – Load – Thru) and TRL (Thru – Reflect -–Line) cali-
bration techniques are used to correct for the effects of
the test board, resulting in accurate device S parameters
Package and Assembly Notes
For detailed description of the device package and
assembly notes, please refer to Application Note 5378.
ESD Precautions
Note: These devices are ESD sensitive. The following pre-
cautions are strongly recommended. Ensure that an ESD
approved carrier is used when die are transported from
one destination to another. Personal grounding is to be
worn at all times when handling these devices. For more
detail, refer to Avago Application Note A004R: Electro-
static Discharge Damage and Control
Ordering Information
Part Number
VMMK-3413-BLKG
VMMK-3413-TR1G
Devices Per
Container
100
5000
Container
Antistatic Bag
7” Reel
Package Dimension Outline
D
E
A
Note:
All dimensions are in mm
Dimensions
Symbol
E
D
A
Min (mm)
0.500
1.004
0.225
Max (mm)
0.585
1.085
0.275
Reel Orientation
REEL
Device Orientation
USER FEED DIRECTION
4 mm
USER
FEED
DIRECTION
CARRIER
TAPE
TOP VIEW
Notes:
“U” = Device Code
“Y” = Month Code
8 mm
END VIEW
7