HSMF-C116 Datasheet, PDF (7/7 Pages) AVAGO TECHNOLOGIES LIMITED – Suitable for application that requires small pitch size

PRECAUTIONARY NOTES
1. Handling of moisture sensitive device
This product has a Moisture Sensitive Level 3 rating per JEDEC J-STD-020. Do refer to Avago Application Note AN5305,
Handling of Moisture Sensitive Surface Mount Devices, for additional details and a review of proper handling procedures.
(a) Before use
- An unopened moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the humidity Indicator Card (HIC) indicates that baking is not required, then it is safe to reflow
the LEDs per the original MSL rating.
- It is recommended that the MBB not be opened prior to assembly (e.g. for IQC).
(b) Control after opening the MBB
- The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all times and all high temperature related processes including soldering,
curing or rework need to be completed within 168 hours.
(c) Control for unfinished reel
- Unused LEDs must be stored in a sealed MBB with desiccant or desiccator at <5%RH.
(d) Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in
sealed MBB with desiccant or desiccator at <5%RH to ensure that all LEDs have not exceeded their floor life of 168
hours.
(e) Baking is required if:
- The HIC indicator is not blue at 10% and is pink at 5%.
- The LEDs are exposed to condition of >30°C / 60% RH at any time.
- The LED floor life exceeded 168hrs.
The recommended baking condition is: 60±5ºC for 20hrs
Baking should only be done once.
Disclaimer
Avago’s products are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for
the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications.
Customer is solely responsible, and waives all rights to make claims against Avago or its suppliers, for all loss, damage,
expense or liability in connection with such use.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved.
February 4, 2015
7