HFBR-1119TZ Datasheet, PDF (7/10 Pages) AVAGO TECHNOLOGIES LIMITED – Fiber Optic Transmitter and Receiver Data Links for 266 MBd

HFBR-1119TZ Transmitter Pin-Out Table
Pin Symbol
1
NC
2
V_BB
3
GND
4
GND
5
GND
6
GND
7
OMIT
8
NC
9
NC
10
GND
11
V_CC
12
V_CC
13
GND
14
DATA
15
DATA
16
NC
Functional Description
No internal connect, used for mechanical strength only
V_BB Bias output
Ground
Ground
Ground
Ground
No pin
No internal connect, used for mechanical strength only
No internal connect, used for mechanical strength only
Ground
Common supply voltage
Common supply voltage
Ground
Data input
Inverted Data input
No internal connect, used for mechanical strength only
Reference
Note 3
Note 3
Note 3
Note 3
Note 5
Note 5
Note 3
Note 1
Note 1
Note 3
Note 4
Note 4
HFBR-2119TZ Receiver Pin-Out Table
Pin Symbol
Functional Description
Reference
1
NC
No internal connect, used for mechanical strength only
2
DATA
Inverted Data input
Note 4
3
DATA
Data input
Note 4
4
V_CC
Common supply voltage
Note 1
5
V_CC
Common supply voltage
Note 1
6
V_CC
Common supply voltage
Note 1
7
GND
Ground
Note 3
8
NC
No internal connect, used for mechanical strength only
Note 5
9
NC
No internal connect, used for mechanical strength only
Note 5
10
OMIT
No pin
11
GND
Ground
Note 3
12
GND
Ground
Note 3
13
GND
Ground
Note 3
14
SD
Signal Detect
Note 2, 4
15
SD
Inverted Signal Detect
Note 2, 4
16
OMIT
No pin
Notes:
1. Voltages on V_CC must be from the same power supply (they are connected together internally).
2. Signal Detect is a logic signal that indicates the presence or absence of an input optical signal. A logic-high, V_OH, on Signal Detect indicates
presence of an input optical signal. A logic-low, V_OL, on Signal Detect indicates an absence of input optical signal.
3. All GNDs are connected together internally and to the internal shield.
4. DATA, DATA, SD, SD are open-emitter output circuits.
5. On metal-port modules, these pins are redefined as “Port Connection.”
7