HDSP-F203-DE000 Datasheet, PDF (7/11 Pages) –

Electrical/Optical
Characteristics
at
T
A
=
25°C,
continued
Yellow
Device
Series
Parameter
Symbol Min.
Typ. Max.
Units
Test Conditions
Luminous Intensity/Segment^[1,2]
(Digit Average)
290 800
I_V
µcd
I_F = 5 mA
Forward Voltage/Segment or DP
V_F
2.2 2.5
V
I_F = 20 mA
HDSP-
F30x/
G30x
Peak Wavelength
Dominant Wavelength^[3,6]
λ_PEAK
583
nm
λ_d 581.5 586 592.5
nm
Reverse Voltage/Segment or DP^[4]
V_R
3.0 40
V
I_R = 100 µA
Temperature Coefficient of
∆V_F/°C
-2
V_F/Segment or DP
mV/°C
Thermal Resistance LED
Junction-to-Pin
Rθ_J-PIN
320
°C/W/Seg
High Performance Green
Device
Series
Parameter
Luminous Intensity/Segment^[1,2]
(Digit Average)
Symbol Min. Typ. Max.
I_V
1030 3500
Units
µcd
Test
Conditions
I_F = 10 mA
HDSP-
F50x/
G50x
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength^[3,6]
Reverse Voltage/Segment or DP^[4]
Temperature Coefficient of
V_F/Segment or DP
Thermal Resistance LED
Junction-to-Pin
V_F
λ_PEAK
λ_d
V_R
3.0
∆V_F /°C
2.1 2.5
566
571 577
50
-2
V
nm
nm
V
mV/°C
I_F = 10 mA
I_R = 100 µA
Rθ_J-PIN
320
°C/W/Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ_d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA
dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series.
6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The
category is designated by a number adjacent to the luminous intensity category letter.
7