HDSP-F151 Datasheet, PDF (7/10 Pages) AVAGO TECHNOLOGIES LIMITED – 10 mm (0.40 inch) Seven Segment Displays

Electrical/Optical Characteristics at T_A = 25°C, continued
Yellow
Device
Series
Parameter
Luminous Intensity/Segment^[1,2]
(Digit Average)
Forward Voltage/Segment or DP
HDSP-
F30x
Peak Wavelength
Dominant Wavelength^[3,6]
Reverse Voltage/Segment or DP^[4]
Temperature Coefficient of
V /Segment or DP
F
Thermal Resistance LED
Junction-to-Pin
Symbol Min. Typ. Max.
I
V
V
F
O_PEAK
O_d
V
R
ΔV /°C
F
290
581.5
3.0
800
2.2 2.5
583
586 592.5
40
-2
Units Test Conditions
μcd I = 5 mA
F
V
nm
nm
V
mV/°C
I = 20 mA
F
I = 100 μA
R
RT_J-PIN
320
°C/W/Seg
High Performance Green
Device
Series
Parameter
Symbol Min. Typ. Max. Units
Test
Conditions
Luminous Intensity/Segment^[1,2]
(Digit Average)
I_V
1030 3500
μcd
I_F = 10 mA
HDSP-
F50x/
G50x
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength^[3,6]
Reverse Voltage/Segment or DP^[4]
Temperature Coefficient of
V /Segment or DP
F
Thermal Resistance LED
Junction-to-Pin
V
F
O_PEAK
O_d
V
3.0
R
ΔV /°C
F
2.1 2.5
566
571 577
50
-2
V
nm
nm
V
mV/°C
I = 10 mA
F
I = 100 μA
R
RT_J-PIN
320
°C/W/Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, O_d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA
dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series.
6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The category is
designated by a number adjacent to the luminous intensity category letter.
7