HCNW139-000E Datasheet, PDF (7/14 Pages) AVAGO TECHNOLOGIES LIMITED – 6N139, 6N138, HCPL-0701, HCPL-0700, HCNW138, HCNW139 Low Input Current, High Gain Optocouplers

Recommended Pb-Free IR Profile
t_p
T_p
T_L ^{217 °C}
* 260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
T_smax
150 - 200 °C
T_smin
t_s
PREHEAT
t_L
60 to 180 SEC.
25
t 25 °C to PEAK
TIME
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
15 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
NOTES:
THE TIME FROM 25 °C to PEAK
TEMPERATURE = 8 MINUTES MAX.
T_smax = 200 °C, T_smin = 150 °C
NOTE: NON-HALIDE FLUX SHOULD BE USED.
* RECOMMENDED PEAK TEMPERATURE FOR
WIDEBODY 400mils PACKAGE IS 245 °C
Regulatory Information
The 6N139/138, HCNW139/138, and HCPL-0701/0700 have been approved by the following organizations:
UL
IEC/EN/DIN EN 60747-5-2
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324.
Approved under
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(HCNW139/138 only)
Insulation and Safety Related Specifications
Parameter
Symbol
8-Pin DIP
(300 Mil)
Value
Minimum External
L(101)
7.1
Air Gap (External
Clearance)
Minimum External
L(102)
7.4
Tracking (External
Creepage)
Minimum Internal
0.08
Plastic Gap
(Internal Clearance)
Minimum Internal
NA
Tracking (Internal
Creepage)
Tracking Resistance
CTI
200
(Comparative
Tracking Index)
Isolation Group
IIIa
SO-8
Value
4.9
4.8
0.08
NA
200
IIIa
Widebody
(400 Mil)
Value
9.6
10.0
1.0
4.0
200
Units
mm
mm
mm
mm
Volts
Conditions
Measured from input terminals
to output terminals, shortest
distance through air.
Measured from input terminals
to output terminals, shortest
distance path along body.
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Measured from input terminals
to output terminals, along
internal cavity.
DIN IEC 112/VDE 0303 Part 1
IIIa
Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
7