AV02-1848EN Datasheet, PDF (7/10 Pages) AVAGO TECHNOLOGIES LIMITED – Plastic Optical Fiber Cable and Accessories for Versatile Link

Ordering Guide for POF Connectors and Accessories
Plastic Optical Fiber Connectors
HFBR-4501 Gray Simplex Connector/Crimp Ring
HFBR-4511 Blue Simplex Connector/Crimp Ring
HFBR-4503 Gray Simplex Latching Connector with Crimp Ring
HFBR-4513 Blue Simplex Latching Connector with Crimp Ring
HFBR-4506 Parchment Duplex Connector with Crimp Ring
HFBR-4516 Gray Duplex Latching Connector with Crimp Ring
HFBR-4505 Gray Adapter (Bulkhead/Feedthrough)
HFBR-4515 Blue Adapter (Bulkhead/Feedthrough)
Plastic Optical Fiber Accessories
HFBR-4522 500 HFBR-0500 Products Port Plugs
HFBR-4525 1000 Simplex Crimp Rings
HFBR-4526 500 Duplex Crimp Rings
HFBR-4593 Polishing Kit (one polishing tool, two pieces 600 grit
abrasive paper, and two pieces 3 µm pink lapping film)
HFBR-4597 Plastic Fiber Crimping Tool
Ordering Guide for POF Cable
For Example:
HFBR-RUD500 is a Standard Attenuation, Unconnectored,
Duplex, 500 meter cable.
HFBR-RLS001 is a Standard Attenuation, Latching Simplex
Connectored, Simplex, 1 meter cable.
HFBR-RMD010 is a Standard Attenuation, Standard Duplex
Connectored, Duplex, 10 meter cable.
HFBR-RMD100 is a Standard Attenuation, Standard Duplex
Connectored, Duplex, 100 meter cable.
Cable Length Tolerances:
The plastic cable length tolerances are: +10%/-0%.
NOTE: By convention, pre-connectored simplex POF ca-
bles have gray and blue colored connectors on the op-
posite ends of the same fiber; although oppositely col-
ored, the connectors are mechanically identical. Duplex
POF cables with duplex connectors use color- coded
markings on the duplex fiber cable to differentiate be-
tween the channel.
HFBR-
Cable Code
R = Standard Attenuation POF
E = Extra Low Loss POF
Connector Code
U = Unconnectored
N = Standard Simplex Connectors
L = Latching Simplex Connectors
M = Standard Duplex Connectors
T = Latching Duplex Connectors
Length Code
(measured from tip of connector to tip of
connector)
1-500 meters in 1 meter increments
e.g. 015 = 15 meters
1-10 meters in 1 decimeter increments
e.g. 15D = 1.5 meters
Channel Code
S = Simplex Cable
D = Duplex Zipcord Cable
Note: Not all possible combinations reflect available part numbers.
Please contact your local Avago representative for a list of current available cable part numbers.