ASSR-301C-003E Datasheet, PDF (7/7 Pages) AVAGO TECHNOLOGIES LIMITED – Low C x R, Form A, Solid State Relay (Photo MOSFET) (250V/50/15pF)

Switching Specifications (AC)
Over recommended operating T_A = -40°C to 85°C, unless otherwise specified.
Parameter
Sym.
Min. Typ. Max. Units Conditions
Note
Turn On Time
T_ON
0.07 0.2
ms
I_F =5mA, I_O=50mA, T_A=25C
Turn Off Time
T_OFF
0.5
ms
0.15 0.5
ms
0.8
ms
0.07 0.2
ms
I_F =5mA, I_O=50mA
I_F =2mA, I_O=50mA, T_A=25C
I_F =2mA, I_O=50mA
I_F =5mA, I_O=50mA, T_A=25C
0.5
ms
0.07 0.2
ms
I_F =5mA, I_O=50mA
I_F =2mA, I_O=50mA, T_A=25C
0.5
ms
I_F =2mA, I_O=50mA
Output Transient
dV_O/dt 1
7
Rejection
kV/s V_O=250V, T_A=25C
Input-Output
dV_I-O/dt 1
10
Transient Rejection
kV/s V_I-O=1000V, T_A=25C
Notes:
1. For qualified device performance over temperature range, it is recommended to operate at I_F =5mA.
2. Device is considered as a two terminal device: pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted together.
3. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your
equipment level safety specification, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage.”
4. The PCB design and environmental conditions are taken into consideration when measuring the I_O(OFF) performance.
5. During the pulsed R_(ON) measurement ( I_O duration 30ms), ambient (T_A) and case temperature (T_C) are equal.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-0452EN - March 19, 2012