HDSP-B5XZ Datasheet, PDF (6/8 Pages) AVAGO TECHNOLOGIES LIMITED – 31.8 mm (1.25 inch) General Purpose 5x7 Dot Matrix Alphanumeric Displays

Optical/Electrical Characteristics at T_A = 25˚C
GaP Red
Devices
HDSP- Parameter
Luminous Intensity/Dot
(Digit Average)^[1]
Peak Wavelength
B5AZ
B5BZ
Dominant Wavelength^[2]
Forward Voltage
Reverse Voltage^[3]
Luminous Intensity
Matching Ratio
Symbol
I_v
λ_peak
λ_d
V_F
V_R
I_v-m
Min. Typ.
2
632
622
2.1
3.0
Max.
2.6
2:1
Units
mcd
nm
nm
V
V
Test Conditions
I_FP = 40 mA,
1/8 Duty Factor
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_R = 100 µA
I_FP = 40 mA,
1/8 Duty Factor
GaP Green
Devices
HDSP- Parameter
Luminous Intensity/Dot
(Digit Average)^[1]
Peak Wavelength
B5AZ
B5BZ
Dominant Wavelength^[2]
Forward Voltage
Reverse Voltage^[3]
Luminous Intensity
Matching Ratio
Symbol
I_v
λ_peak
λ_d
V_F
V_R
I_v-m
Min. Typ.
3.4
568
573
2.3
3.0
Max.
2.6
2:1
Units
mcd
nm
nm
V
V
Test Conditions
I_FP = 40 mA,
1/8 Duty Factor
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_R = 100 µA
I_FP = 40 mA,
1/8 Duty Factor
Bi-Color
Devices
HDSP- Parameter
B5AZ
B5BZ
Luminance/Unit
(Digit Average)^[1]
Symbol
I_v
Min. Typ.
124.1 215
Max.
372
Units
Cd/m²
Test Conditions
I_FP = 40 mA,
1/8 Duty Factor
Notes:
1. The digits are categorized for luminance. The category is designated by a letter on the side of the package.
2. The dominant wavelength, λ_d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.
6