HDSP-3901-EF000 Datasheet, PDF (6/9 Pages) AVAGO TECHNOLOGIES LIMITED – 20 mm (0.8 inch) Seven Segment Displays

Yellow
Device
Series
Parameter
HDSP-
420x
Luminous Intensity/Segment^[1,2]
(Digit Average)
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength^[3,6]
Reverse Voltage/Segment or DP^[4]
Temperature Coefficient of
V_F/Segment or DP
Thermal Resistance LED Junction-
to-Pin
Symbol
I_V
V_F
O_PEAK
O_d
V_R
'V_F/°C
Min.
2200
581.5
3.0
Typ. Max.
7000
3400
2.6
583
586
25.0
-2
3.5
592.5
Units
Pcd
Pcd
V
nm
nm
V
mV/°C
Test Conditions
I_F = 100 mA Peak:
1 of 5 df
I_F = 20 mA
I_F = 100 mA
I_R = 100 PA
RT_J-PIN
375
°C/W/
Seg
Green
Device
Series
Parameter
Luminous Intensity/Segment^[1,2]
(Digit Average)`
HDSP-
860x
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength^[3,6]
Reverse Voltage/Segment or DP^[4]
Temperature Coefficient of
V_F/Segment or DP
Thermal Resistance LED Junction-
to-Pin
Symbol
I_V
V_F
O_PEAK
O_d
V_R
'V_F/°C
RT_J-PIN
Min. Typ. Max.
680 1500
Units Test Conditions
Pcd I_F = 10 mA
1960
Pcd I_F = 50 mA Peak:
1 of 5 df
2.1 2.5
566
V I_F = 10 mA
nm
571 577 nm
3.0 50.0
-2
V I_R = 100 PA
mV/°C
375
°C/W/
Seg
Notes:
1. Case temperature of the device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the
device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs Red HDSP-N100 series displays are recommended. They are tested at 1 mA dc/segment and are pin for
pin compatible with the HDSP-N150 series.
6. The Yellow (HDSP-420x) and Green (HDSP-860x) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
6