ASDL-3007 Datasheet, PDF (5/19 Pages) AVAGO TECHNOLOGIES LIMITED – Data Compliant Low Power 115.2 Kbit/s with Remote Control Infrared Transceiver

Recommended Operating Conditions
Parameter
Operating Temperature
Supply Voltage
LED Anode Voltage
Logic Input Voltage for TXD IR
Logic Input Voltage for TXD RC
Logic Input Voltage for SD
Receiver Input Irradiance
Logic High
Logic Low
Logic High
Logic Low
Logic High
Logic Low
Logic High
Logic Low
LED (Logic High) Current Pulse Amplitude (IR)
LED (Logic High) Current Pulse Amplitude (RC)
Receiver Data Rate
Ambient Light
Symbol
T_A
V_CC
V_LEDA
V_IH-IR
V_IL-IR
V_IH-RC
V_IL-RC
V_IH-SD
V_IL-SD
EI_H
EI_L
I_LEDA
I_LEDA
Min.
-25
2.4
Vcc-0.5
0
Vcc-0.5
0
Vcc-0.5
0
0.0090
Typ. Max.
+85
3.6
5.5
Vcc
0.4
Vcc
0.4
Vcc
0.4
500
0.3
40
150
9.6
Units
°C
V
V
V
V
V
V
V
V
mW/cm2
mW/cm2
mA
mA
115.2
Conditions
VledA < Vcc + 4V
For in-band signals ≤
115.2kbit/s ^[3]
For in-band signals ^[3]
kbit/s
See IrDA Serial Infrared
Physical Layer Link
Specification, Appendix A
for ambient levels
Note :
[1] An in-band optical signal is a pulse/sequence where the peak wavelength, lp, is defined as 850 ≤ lp ≤ 900 nm, and the pulse characteristics are
compliant with the IrDA Serial Infrared Physical Layer Link Specification v1.4.