ACPL-K30T Datasheet, PDF (5/10 Pages) AVAGO TECHNOLOGIES LIMITED – Automotive Photovoltaic MOSFET Driver

Recommended Operating Conditions
Parameter
Input Current (ON)
Symbol
I_F(ON)
Input Voltage (OFF)
Operating Temperature
V_F(OFF)
T_A
Min.
Max. Units Note
10
20 mA
30
Pulse width < 1 s, duty cycle < 50%
0
0.8 V
-40
125 °C
Electrical Specifications (DC)
Unless otherwise stated, all minimum/maximum specifications are over recommended operating conditions. All typical
values are at T_A = 25 °C.
Parameter
Symbol Min. Typ. Max. Units Test Conditions
Open Circuit Voltage
Temperature Coefficient
of Open Circuit Voltage
V_OC
4.0 7
4.5
4.5 7.5
ΔV_OC/ΔT_A
-21
V
mV/°C
I_F =10 mA, I_O = 0 mA
I_F =10mA, I_O = 0 mA,
T_A = 105 °C
I_F = 20 mA, I_O = 0 mA
I_F = 10 mA, I_O = 0 mA
Short Circuit Current
Input Forward Voltage
Temperature Coefficient of
Forward Voltage
I_SC
V_F
ΔV_F/ΔT_A
2.0 5.0
µA
I_F = 10 mA, V_O = 0 V
4.0 10.0
I_F = 20 mA, V_O = 0 V
1.25 1.55 1.85 V
I_F =10 mA
-1.5
mV/°C I_F =10 mA
Input Reverse Breakdown Voltage BV_R
6
V
I_R =10 µA
Figures Notes
3, 4
3, 4
4
5, 6
5, 6
Switching Specifications (AC)
Unless otherwise stated, all minimum/maximum specifications are over recommended operating conditions. All typical
values are at T_A = 25 °C.
Parameter
Turn-On Time
Turn-Off Time
Symbol
T_ON
T_OFF
Min. Typ. Max. Units
0.8 2.0 ms
0.4 1.0
0.04 0.12 ms
Test Conditions
I_F =10 mA, C_L = 1 nF
I_F =20 mA, C_L= 1 nF
I_F =10 mA/20 mA, C_L = 1 nF
Figures
7,10,11
7,10,11
8, 9,11
Notes
Package Characteristics
Unless otherwise stated, all minimum/maximum specifications are over recommended operating conditions. All typical
values are at T_A = 25 °C.
Parameter
Symbol Min. Typ. Max. Units Test Conditions
Figures Notes
Input-Output Momentary
V_ISO
5000
V_RMS RH ≤ 50%, t = 1 minute,
1, 2
Withstand Voltage*
T_A = 25 °C
Input-Output Resistance
R_I-O
10⁹ 10¹⁴
Ω
V_I-O = 500 V_DC
1
Input-Output Capacitance
C_I-O
0.6
pF
f = 1 MHz, V_I-O = 0 V_DC
1
* The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating.
Notes:
1. Device considered a two-terminal device: pins 1, 2, 3 and 4 shorted together, and pins 5, 6, 7 and 8 shorted together.
2. In accordance with UL 1577, each optocoupler is proof-tested by applying an insulation test voltage > 6000 V_RMS for 1 second.
5