HDSP-70XE Datasheet, PDF (4/6 Pages) AVAGO TECHNOLOGIES LIMITED – 17.3 mm (0.68 inch) General Purpose 5x7 Dot Matrix Alphanumeric Displays

Optical/Electrical Characteristics at T_A = 25°C, continued
Green
Devices
HDSP-
Parameter
Symbol Min. Typ. Max. Units
Test
Conditions
Luminous Intensity/Dot
(Digit Average)^[1]
I_V
0.96 2.50
mcd I_F = 50 mA,
20% Duty Factor
701G
711G
703G
713G
Peak Wavelength
Dominant Wavelength^[2]
Forward Voltage
Reverse Voltage^[3]V_R
Luminous Intensity
Matching Ratio
l_PEAK
ld
V_F
5
I_V-M
568
nm
573
nm
3.40 V
1.80 2.25 2.60
1.60
V
2:1
I_F = 20 mA
I_F = 20 mA
I_F = 50 mA
I_F = 20 mA
I_F = 5 mA
I_R = 100 µA
I_F = 50 mA
20% Duty Factor
AlGaAs
Devices
HDSP-
701A
711A
703A
713A
Parameter
Luminous Intensity/Dot
(Digit Average)^[1]
Peak Wavelength
Dominant Wavelength^[2]
Forward Voltage
Reverse Voltage^[3]V_R
Luminous Intensity
Matching Ratio
Symbol Min. Typ. Max. Units
Test
Conditions
I_V
1.55 2.10
mcd I_F = 10 mA,
20% Duty Factor
l_PEAK
ld
V_F
660
nm I_F = 20 mA
643
nm I_F = 20 mA
1.8 2.0 V I_F = 20 mA
2.0
I_F = 10 mA
1.5
I_F = 5 mA
5
V I_R = 100 µA
I_V-M
1.5:1
I_F = 10 mA
20% Duty Factor
Notes:
1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.