HDSP-0760_08 Datasheet, PDF (4/8 Pages) AVAGO TECHNOLOGIES LIMITED – Hexadecimal and Numeric Displays for Industrial Applications

Absolute Maximum Ratings
Description
Storage Temperature, Ambient
Operating Temperature, Ambient^[1]
Supply Voltage^[2]
Voltage Applied to Input Logic, dp and Enable Pins
Voltage Applied to Blanking Input^[2]
Soldering Temperature [1.59 mm (0.063 inch) Below Body]
  Solder Dipping, max. 5 Seconds
Wave Soldering, max. 3 Seconds
Symbol
Min.
Max.
Unit
T_S
-65
+100
°C
T_A
-55
+85
°C
V_CC
-0.5
+7.0
V
V_I, V_DP , V_E
-0.5
V_CC
V
V_B
-0.5
V_CC
V
260
°C
250
°C
Recommended Operating Conditions
Description
Supply Voltage^[2]
Operating Temperature, Ambient^[1]
Enable Pulse Width
Time Data Must Be Held Before Positive Transition of Enable Line
Time Data Must Be Held After Positive Transition of Enable Line
Enable Pulse Rise Time
Symbol
V_CC
T_A
t_W
t_SETUP
t_HOLD
t_TLH
Min.
Nom.
Max. Unit
4.5
5.0
5.5
V
-55
+85 °C
100
nsec
50
nsec
50
nsec
1.0
msec
Optical Characteristics at T_A = 25°C, V_CC = 5.0 V
Device
Description
HDSP-0760
Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5]
HDSP-0770
Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5]
HDSP-0860
Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5,6]
HDSP-0960
Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5,6]
Symbol
I_V
l_PEAK
l_d
I_V
l_PEAK
l_d
I_V
l_PEAK
l_d
I_V
l_PEAK
l_d
Min.
Typ. Max. Unit
65
140
µcd
635
nm
626
nm
260
620
µcd
635
nm
626
nm
215
490
µcd
583
nm
585
nm
298
1100
µcd
568
nm
574
nm
Notes:
1. The nominal thermal resistance of a display mounted in a socket that is soldered onto a printed circuit board is Rq_JA = 50°C/W/device. The
device package thermal resistance is Rq_J-PIN = 15°C/W/device. The thermal resistance device pin-to-ambient through the PC board should not
exceed 35°C/W/device for operation at T_A = +85°C.
2. Voltage values are with respect to device ground, pin 6.
3. These displays are categorized for luminous intensity with the intensity category designated by a letter code located on the back of the display
package. Case temperature of the device immediately prior to the light measurement is equal to 25°C.