HCPL-314J-000E Datasheet, PDF (4/15 Pages) AVAGO TECHNOLOGIES LIMITED – 0.4 Amp Output Current IGBT Gate Drive Optocoupler

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics
Description
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 150 V_rms
for rated mains voltage ≤ 300 V_rms
for rated mains voltage ≤ 600 V_rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
V_IORM x 1.875=V_PR, 100% Production Test with
t_m=1 sec, Partial discharge < 5 pC
Input to Output Test Voltage, Method a*
V_IORM x 1.5=V_PR, Type and Sample Test,
t_m=60 sec, Partial discharge < 5 pC
Highest Allowable Overvoltage
(Transient Overvoltage t_ini = 10 sec)
Safety-limiting values
- maximum values allowed in the event of a failure.
Case Temperature
Input Current**
Output Power**
Insulation Resistance at T_S, V_IO = 500 V
Symbol
V_IORM
V_PR
V_PR
V_IOTM
Characteristic
I - IV
I - IV
I - III
55/100/21
2
891
1670
1336
6000
Unit
V_peak
V_peak
V_peak
V_peak
T_S
175
°C
I_S,INPUT
400
mA
P_{S, OUTPUT}
1200
mW
R_S
>10⁹
Ω
* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulationssection, IEC/
EN/DIN EN 60747-5-2, for a detailed description of Method a and Method b partial discharge test profiles.
** Refer to the following figure for dependence of P_S and I_S on ambient temperature.
800
700
P_S (mW)
I_S (mA)
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200
T_S – CASE TEMPERATURE – °C
HCPL-J314
4