ACPL-7900-500E Datasheet, PDF (4/15 Pages) AVAGO TECHNOLOGIES LIMITED – Precision Isolation Amplifiers

ACPL-790B, ACPL-790A, ACPL-7900
Data Sheet
Recommended Pb-Free IR Profile
Figure 2 Gull Wing Surface Mount Option 300
9.80 ± 0.25
(0.386 ± 0.010)
8
7
6
5
6.350 ± 0.25
(0.025 ± 0.010)
LAND PATTERN RECOMMENDATION
1.016 (0.040)
1
2
3
4
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
1.080 ± 0.320
(0.043 ± 0.013)
2.54
(0.100)
BSC
0.635 ± 0.130
(0.025 ± 0.005)
0.635 ± 0.25
(0.025 ± 0.010)
Dimensions in millimeters (inches).
NOTE Floating lead protrusion is 0.5 mm (20 mils) max.
Tolerances (unless otherwise specified):
xx.xx = 0.01
xx.xxx = 0.005
Lead coplanarity
Maximum: 0.102 (0.004)
10.9 (0.430)
2.0 (0.080)
0.20 (0.008)
0.33 (0.013)
12˚ NOM.
Recommended Pb-Free IR Profile
Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
Regulatory Information
The ACPL-790B/790A/7900 is approved by the following organizations:
 IEC/EN/DIN EN 60747-5-5
Approved with Maximum Working Insulation Voltage, V_IORM = 891 Vpeak.
 UL
Approval under UL 1577, component recognition program up to V_ISO = 5000 Vrms/1 min. File E55361.
 CSA
Approval under CSA Component Acceptance Notice #5, File CA 88324.
Avago Technologies
-4-