English
Language : 

IAM-93516 Datasheet, PDF (3/10 Pages) Agilent(Hewlett-Packard) – High Linearity Integrated GaAs Mixer
◁
3.0 IAM-93516 Electrical Specifications[6,8]
TA = 25oC, DC = 5V, RF Freq = 1.91GHz, PinRF = -10dBm, LO Freq = 1.7GHz, PinLO = 0dBm (unless otherwise specified)
Symbol Parameter and Test Condition
Units
Min.
Typ
Max.
Id [7]
Device Current
mA
95.0
111.2
125.0
GC
IIP3 [8]
Conversion Gain
Output Third Order Intercept Point
dB
7.9
9.4
10.9
dBm
20.5
23.1
-
NF
SSB Noise Figure
dB
-
11.6
-
P1dB
Output Power at 1dB Gain Compression
dBm
-
19.3
-
RLRF
RF Port Return Loss
dB
-
12.0
-
RLLO
LO Port Return Loss
RLIF
IF Port Return Loss
dB
-
dB
-
20.0
-
11.0
-
ISOLL-R
LO-RF Isolation
dB
-
26.0
-
ISOLL-I
LO-IF Isolation
dB
-
20.0
-
ISOLR-L
RF-IF Isolation
dB
-
32.0
-
Notes:
5. Distribution data sample size is 510 samples taken from 3 different wafers lots. Future wafers allocated to this product may have nominal val-
ues anywhere between the upper and lower limits.
6. Measurements were made on a production test board, which represents a trade-off between optimal Gain, IIP3, NF, P1dB and isolation. Board
losses of 0.1dB at the RF input and IF amplifier output have been compensated. Balun loss of 0.57dB which was obtained from the Toko’s sup-
plied s-parameter file is also compensated. The total IF amplifier output loss is 0.67dB.
7. The device current is measured without LO signal. At LO=0dBm, the current reduces by around 6 to 7mA.
8. Gain, P1dB, isolation and return loss test conditions: FRF =1.91GHz, FLO = 1.7GHz, FIF = 210MHz, PinRF = -10dBm, PinLO = 0dBm.
IIP3 test condition: FRF1 = 1.91GHz, FRF2 = 1.89GHz, FLO = 1.7GHz, PinRF = -10dBm, PinLO = 0dBm.
4.0 IAM-93516 Typical Performance[9,10]
TA = 25oC, DC = 5V, RF Freq = 1.91GHz, PinRF = -10dBm, LO Freq = 1.7GHz (unless otherwise specified)
1nH
nH  Ohm
1pF
LO +
1.nH
RF
1.pF
LO -
.nH
.nH
0.pF 1.pF
Interstage Match
0nH
1000pF
Balun Transformer
Toko BF
1DB-101
IF
1000pF
Interstage Match
1nH
nH  Ohm 1pF
0.pF 1.pF
0nH
Figure 4. IAM-93516 demoboard schematic optimally tuned at FRF = 1.91GHz and FLO = 1.7GHz

 ▷