ACPL-P454 Datasheet, PDF (3/9 Pages) AVAGO TECHNOLOGIES LIMITED – High CMR High Speed Optocoupler Surface Mountable in 6-pin stretched SO6

ACPL-P454 (Stretched SO6, 7mm Clearance)
0.38 ± 0.127
[.015 ± .005]
1.27 [.050] BSG
4.580 ^+0.254
0
+.010
.180
- .000
Land Pattern Recommendation
10.7 [.421]
0.45 [.018]
7.62 [.300]
6.81 [.268]
45.00°
1 ± .0.250
[.040 ± .010]
0.20 ± 0.10
[.008 ± .004]
A
9.7 ± 0.250
[.382 ± .010]
1.590 ± 0.127
[.063 ± .005]
7.00°
7.00°
3.180 ± 0.127
[.125 ± .005]
2.16 [.085]
0.20 [.008]
7.00°
7.00°
Dimensions in Millimeters [Inches]
Coplanarity = 0.1mm [0.004 inches]
Recommended Pb-Free IR Profile
Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
Regulatory Information
The ACPL-W454/P454 are approved by the following organizations:
IEC/EN/DIN EN 60747-5-2 (Option 060 only)
Approval under:
IEC 60747-5-2 :1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
UL - Approval under UL 1577, component recognition pro-
gram up to V_ISO = 3750 V_RMS (5000VRMS for ACPL-W454).
File E55361.
CSA - Approval under CSA Component Acceptance Notice
#5, File CA 88324.
3