ACFM-7107-TR1 Datasheet, PDF (3/18 Pages) AVAGO TECHNOLOGIES LIMITED – PCS/Cellular Band Quadplexer

ACFM-7107 Electrical Specifications, Z₀=50 , T_C ^{[1] [2] [4]} as indicated
– 30°C
+25°C
+85°C
Symbol Parameter
Units Min Typ ^[3] Max Min Typ ^[3] Max Min Typ ^[3] Max
PCS Duplexer Performance
Antenna Port to PCS Receive Port
S31
Insertion Loss in Rx Band
dB
3.6
1.6 3.6
3.6
(1930.5–1989.5 MHz)
S31
Insertion Loss Ripple (p-p)
dB
1.5
in Rx Band
S31
Attenuation in Tx Band
(1850.5–1909.5 MHz)
dB 50
50 62
50
S31
Attenuation 0.03–1770 MHz
dB 20
20 40
20
S31
Attenuation 2025–3500 MHz
dB 30
30 60
30
S31
Attenuation 3500–3700 MHz
dB 27
27 38
27
S31
Attenuation 3820–4000 MHz
dB 23
23 30
23
S33
Return Loss (SWR) of Rx Port in
dB 9
(2.1) 9
15 (2.1) 9
(2.1)
Rx Band (1930.5–1989.5 MHz)
(1.4)
S11
Return Loss (SWR) of Antenna Port dB 9
(2.1) 9
18 (2.1) 9
(2.1)
in Rx Band (1930.5–1989.5 MHz)
(1.3)
PCS Transmit Port to Antenna Port
S12
Insertion Loss in Tx Band
dB
3.1
1.3 3.1
3.1
(1850.5–1909.5 MHz)
S12
Insertion Loss Ripple (p-p) in Tx Band dB
1.5
S12
Attenuation in Rx Band
(1930.5–1989.5 MHz)
dB 39
39 48
39
S12
Attenuation 0.03–1570 MHz
dB 15
15 43
15
S12
Attenuation in GPS Band
(1574.4–1576.4 MHz)
dB 27
27 31
27
S12
Attenuation 1580 – 1700 MHz
dB 25
25 36
25
S12
Attenuation in Tx 2^nd harmonic
band (3701–3819 MHz)
dB 10
10 23
10
S12
Attenuation in Tx 3^rd harmonic
band (5551.5–5728.5 MHz)
dB 8
8
25
8
S22
Return Loss (SWR) of Tx Port
dB 9.5
(2.0) 9.5 16 (2.0) 9.5
(2.0)
in Tx band (1850.5–1909.5 MHz)
(1.4)
S11
Return Loss (SWR) of Antenna port dB 9
(2.1) 9
16 (2.1) 9
(2.1)
in Tx Band (1850.5–1909.5 MHz)
(1.4)
Isolation, PCS Transmit Port to PCS Receive Port
S32
Isolation, Tx to Rx port in Rx Band
dB 40
(1930.5–1989.5 MHz)
40 49
40
S32
Isolation, Tx to Rx port in Tx Band
(1850.5–1855 MHz)
dB 53
(1855–1909.5 MHz)
54
53 59
53
54 64
54
Notes:
1. T_C is defined as Case Temperature, the temperature of the bottom mounting surface of the quadplexer where it makes contact with the circuit
board.
2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx ports equal to or less than +29 dBm over all Tx
frequencies unless otherwise noted.
3. Typical data is the arithmetic mean value of the parameter over its indicated frequency range at the specified temperature. Typical values may vary
over time.
4. Specifications are for circuit shown in Figure 1 and include effect of 5.1 nH inductor and 1.0 pF capacitor added to Port 1 (Ant) via simulation.
3