HFBR-2505AFZ Datasheet, PDF (2/10 Pages) –

Package Information
All HFBR-X5X5XFZ series transmitters and receivers are
housed in a dual-in-line metal package that is high
strength. The package is designed for auto-insertion and
wave soldering so it is ideal for high volume production
applications.
Handling and Design Information
When soldering, it is advisable to leave the protective
cap on the unit to keep the optics clean. Good system
performance requires clean port optics and cable ferrules
to avoid obstructing the optical path. Clean compressed
air often is sufficient to remove particles of dirt; methanol
on a cotton swab also works well.
Recommended Chemicals for Cleaning/Degreasing
HFBR-X5X5XFZ Products
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane.
Other: soap solution, naphtha.
Do not use partially halogenated hydrocarbons such as
1,1,1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride, phenol,
methylene chloride or N-methylpyrolldone. Also, Avago
does not recommend the use of cleaners that use
halogenated hydrocarbons because of their potential
environmental harm.
CAUTION: The small junction size inherent in the design of these components increases the components’ susceptibility
to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and
assembly of these components to prevent damage and/or degradation which may be induced by ESD.
Specified Link Performance
-40˚C to +85°C unless otherwise noted.
Parameter
Symbol Min.
Max.
Unit
Link Distance with
HFBR-1505AFZ/2505AFZ or
HFBR-1515BFZ/2515BFZ
1
0.1
40
m
0.1
100
m
Link Distance with
HFBR-1505CFZ/2505CFZ
1
0.1
50
m
0.1
300
m
Pulse Width Distortion
PWD
–30
+30
ns
with HFBR-1505AFZ/2505AFZ
or HFBR-1515BFZ/2515BFZ
Pulse Width Distortion
PWD
–125
+125
ns
with HFBR-1505CFZ/2505CFZ
Notes:
1. With recommended Tx and Rx circuits (60 mA nominal drive current).
2. POF HFBR-ExxyyyZ 0.23 dB/m worst case attentuation.
3. HCS Worst Case Attenuation is 10dB/km (0°C to 70°C) and 12dB/km (-40°C to 85°C).
4. Including a 3 dB optical safety margin accounting for link service lifetime.
5. Including a 2 dB optical safety margin accounting for link service lifetime.
6. Signaling rate DC to 10 MBd.
7. Signaling rate DC to 2 MBd.
Condition
POF
HCS^®
POF
HCS^®
25% to 75%
duty cycle
arbitrary duty cycle
Reference
Notes 1, 2, 3, 4, 6
Notes 1, 2, 3, 5, 6
Notes 1, 2, 3, 4, 7
Notes 1, 2, 3, 5, 7
Note 1
Note 1
2
Specifications and content subject to change without prior notification.