HFBR-2521ETZ Datasheet, PDF (14/16 Pages) AVAGO TECHNOLOGIES LIMITED – Versatile Link The Versatile Fiber Optic Connection

HFBR-15X2ETZ Transmitters
ANODE ¹
CATHODE ²
GROUND ³
GROUND ⁴
8 GROUND
5 GROUND
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Cycle
Forward Input Current
Temp.
Time
Reverse Input Voltage
Pin #
Function
1
Anode
2
Cathode
3
Ground
4
Ground
5
Ground
8
Ground
Note: Pins 5 and 8 are for mounting and retaining purposes
only. Do not electrically connect these pins.
Symbol
T_S
T_A
I_FPK
I_Fdc
V_BR
Min.
Max.
Units
Reference
–40
+85
°C
–40
+85
°C
260
°C
Note 1, 4
10
sec
1000
mA
Note 2, 3
80
5
V
Notes:
1. 1.6 mm below seating plane.
2. Recommended operating range between 10 and 750 mA.
3. 1 s pulse, 20 s period.
4. Moisture sensitivity level is MSL-3
All HFBR15XXETZ LED transmitters are classified as IEC 825-1 Accessible Emission Limit (AEL) Class 1 based upon the current proposed
draft scheduled to go into effect on January 1, 1997. AEL Class 1 LED devices are considered eye safe. Contact your Avago sales
representative for more information.
Transmitter Electrical/Optical Characteristics -40° to 85° C unless otherwise specified.
For forward voltage and output power vs. drive current graphs.
Parameter
Transmitter Output
Optical Power
Output Optical Power
Temperature Coefficient
Peak Emission Wavelength
Forward Voltage
Forward Voltage
Temperature Coefficient
Effective Diameter
Reverse Input Breakdown
Voltage
Diode Capacitance
Rise Time
Fall Time
Symbol
P_T
P_T/T
_PK
V_F
V_F/T
D_T
V_BR
C_O
t_r
t_f
Min.
–13.9
–11.2
Typ.
–0.85
660
1.43 1.67
–1.37
1
5.0 11.0
86
20
20
Max. Units
Conditions
–4.0 dBm I_Fdc = 60 mA
–5.1
I_Fdc = 60 mA, 25° C
%/° C
nm
2.05
V
I_Fdc = 60 mA
mV/° C
mm
V
I_Fdc = 10 μA,
T_A = 25° C
pF V_F = 0, f = 1 MHz
ns 10% to 90%,
ns I_F = 60 mA
Ref.
Note 1
Fig. 09
Note 2
Note:
1. Optical power measured at the end of 0.5 m of 1 mm diameter POF (NA = 0.5) with a large area detector.
2. Rise and fall times are measured with a voltage pulse driving the transmitter driver IC (75451). A wide bandwidth optical to electrical waveform
analyzer, terminated to a 50  input of a wide bandwidth oscilloscope, is used for this response time measurement.
14