|
HCPL-2232-300E Datasheet, PDF (10/18 Pages) AVAGO TECHNOLOGIES LIMITED – Very High CMR, Wide VCC Logic Gate Optocouplers | |||
|
◁ |
Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Units
Note
Storage Temperature
TS
-55
125
°C
Operating Temperature
TA
- 40
85
°C
Average Forward Input Current
IF(AVG)
10
mA
1
Peak Transient Input Current
â (⤠1 µs Pulse Width, 300 pps)
IF(TRAN)
1.0
A
1
â (⤠200 µs Pulse Width,
HCNW22XX
40
mA
ââ < 1% Duty Cycle)
Reverse Input Voltage
VR
5
V
1
HCNW22XX
3
Average Output Current
IO
25
mA
1
Supply Voltage
VCC
0
20
V
Output Voltage
VO
-0.5
20
V
1
Total Package Power Dissipation
PT
210
mW
2
HCPL-223X
294
Output Power Dissipation
PO
See Figure 7
1
Lead Solder Temperature (Through Hole Parts Only) ââââââââââ 260°C for 10 sec.,
ââ 1.6 mm below seating plane
HCNW22XXââââ 260°C for 10 sec., up to seating plane â
Solder Reflow Temperature Profile âââââ
(Surface Mount Parts Only)
See Package Outline Drawings section
Recommended Operating Conditions
Parameter
Symbol
Min.
Power Supply Voltage
VCC
4.5
Forward Input Current (ON)
IF(ON)
1.6*
HCPL-223X
1.8â
Forward Input Voltage (OFF)
Operating Temperature
Junction Temperature
Fan Out
VF(OFF)
-
TA
-40
TJ
-40
N
Max.
Units
20
V
5
mA
0.8
V
85
°C
125
°C
4
TTL Loads
*The initial switching threshold is 1.6 mA or less. It is recommended that 2.2 mA be used to permit at least a 20% LED degradation guardband.
â The initial switching threshold is 1.8 mA or less. It is recommended that 2.5 mA be used to permit at least a 20% LED degradation guardband.
10
|
▷ |