HCPL-0601-500 Datasheet, PDF (10/21 Pages) AVAGO TECHNOLOGIES LIMITED – High CMR, High Speed TTL Compatible Optocouplers

Absolute Maximum Ratings* (No Derating Required up to 85 °C)
Parameter
Symbol
Package**
Min.
Max.
Units Note
Storage Temperature
T_S
-55
125
Operating Temperature^†
T_A
- 40
85
Average Forward Input Current
I_F
Single 8-Pin DIP
20

Single SO-8

Widebody
°C
°C
mA
2


Dual 8-Pin DIP
Dual SO-8
15
1, 3
Reverse Input Voltage
V_R
8-Pin DIP, SO-8
5

Widebody
3
V
1
Input Power Dissipation
Supply Voltage
(1 Minute Maximum)
P_I
Widebody 40
mW
V_CC 7
V
Enable Input Voltage (Not to
V_E
Exceed V_CC by more than
500 mV)
Single 8-Pin DIP
V_CC + 0.5
V
Single SO-8
Widebody
Enable Input Current
I_E 5
Output Collector Current
I_O 50
Output Collector Voltage
V_O 7
Output Collector Power
P_O
Single 8-Pin DIP
85
Dissipation
Single SO-8

Widebody
mA
mA
1
V
1
mW


Dual 8-Pin DIP
Dual SO-8
60
1, 4
Lead Solder Temperature
T_LS
8-Pin DIP 260 °C for 10 sec.,
(Through Hole Parts Only)             1.6 mm below seating plane

Widebody 260 °C for 10 sec.,
up to seating plane
Solder Reflow Temperature            SO-8 and See Package Outline
Profile (Surface Mount Parts Only)
Option 300 Drawings section
*JEDEC Registered Data (for 6N137 only).
**Ratings apply to all devices except otherwise noted in the Package column.
†0 °C to 70 °C on JEDEC Registration.
Recommended Operating Conditions
Parameter
Symbol
Min.
Max.
Units
Input Current, Low Level
Input Current, High Level^[1]
Power Supply Voltage
Low Level Enable Voltage^†
High Level Enable Voltage^†
Operating Temperature
Fan Out (at R_L = 1 kΩ)^[1]
Output Pull-up Resistor
I_FL*
0
I_FH**
5
V_CC
4.5
V_EL
0
V_EH
2.0
T_A
-40
N
R_L
330
250
µA
15
mA
5.5
V
0.8
V
V_CC
V
85
°C
5
TTL Loads
4k
Ω
*The off condition can also be guaranteed by ensuring that V_FL ≤ 0.8 V.
**The initial switching threshold is 5 mA or less. It is recommended that 6.3 mA to 10 mA be used for best performance and to permit at least a 20%
LED degradation guardband.
†For single channel products only.
10