SPFEIM100-G Datasheet, PDF (1/5 Pages) AVAGO TECHNOLOGIES LIMITED – Integrated EMI shielding

SPFEIM100_G
Fiber Optic Transceiver For Fast Ethernet
Data Sheet
Description
The 8-pin Optical Transceiver is a highly integrated CMOS
IC combined with a high speed photodiode and LED
designed to receive and transmit up to 125Mbit/s optical
data which can be 4b5b or 8b10b coded (up to 125Mbit/
s). The internal peaking and clamping circuit will yield an
ideal eye-opening.
Application
Optical Transceiver for Fast Ethernet over POF
Features
The Avago high speed fiber optical transceiver for Fast
Ethernet is an excellent solution for converting high
speed binary data to differential digital data.
• Data rate up to 100Mbit/s (125MBaud)
• Integrated EMI shielding
• Operating temperature range 0°C to 70°C
• Operating @ 3.3V Power Supply
• Bare fiber header (which supports thin and flexible Plastic
Optical Fiber (POF) with 1.5mm outer jacket diameter)
integrated. Fiber pull out strength >20N (Ta = 25°C)
• Green package (lead free and halogen free)
• 650nm LED with integrated driving circuit (logic to
light)
• No light toggling of the LED at no signals on the input
data lines
Safety Hints
Applications of new chip technologies lead to increasing optical efficiency and growing and higher
levels of optical performance. We therefore recommend that the current versions of the IEC 60825-1 and
EN 60825-1 standards are taken into account right from the outset, i.e. at the equipment development stage, and
that suitable protection facilities are provided.