PEX8714 Datasheet, PDF (1/4 Pages) AVAGO TECHNOLOGIES LIMITED – PCI Express Gen3 Switch

PEX8714, PCI Express Gen3 Switch, 12 Lanes, 5 Ports
Highlights
 PEX8714 General Features
o 12-lane, 5-port PCIe Gen3 switch
- Integrated 8.0 GT/s SerDes
o 19 x 19mm², 324-ball FCBGA package
o Typical Power: 2.7 Watts
 PEX8714 Key Features
o Standards Compliant
- PCI Express Base Specification, r3.0
(compatible w/ PCIe r1.0a/1.1 & 2.0)
- PCI Power Management Spec, r1.2
- Microsoft Windows Logo Compliant
- Supports Access Control Services
- Dynamic link-width control
- Dynamic SerDes speed control
o High Performance
 performancePAK
 Multicast
 Dynamic Buffer/FC Credit Pool
- Non-blocking switch fabric
- Full line rate on all ports
- Cut-Thru with 154ns max packet latency
- 2KB Max Payload Size
o Multi-Host & Fail-Over Support
- 1 Configurable Non-Transparent ports
- Failover with Non-Transparent port
o Quality of Service (QoS)
- Traffic Class Queuing
- Eight traffic classes per port
- Weighted round-robin source
port arbitration
o Reliability, Availability, Serviceability
 visionPAK
 Per Port Performance Monitoring
 SerDes Eye Capture
 PCIe Packet Generator
 Error Injection and Loopback
- 1 Hot-Plug port with native HP Signals
- All ports Hot-Plug capable thru I²C
- SSC Isolation on up to 4 ports
- ECRC and Poison bit support
- Data Path parity
- Memory (RAM) Error Correction
- Advanced Error Reporting
- Port Status bits and GPIO available
- JTAG AC/DC boundary scan
The ExpressLane^TM PEX8714 device offers Multi-Host PCI Express
switching capability enabling users to connect multiple hosts to their
respective endpoints via scalable, high bandwidth, non-blocking
interconnection to a wide variety of applications including servers, storage
systems, and communications platforms. The PEX8714 is well suited for
fan-out, aggregation, and peer-to-peer applications.
Multi-Host Architecture
The PEX8714 employs an enhanced architecture, which allows users to
configure the device in legacy single-host mode or multi-host mode with up
to two host ports by using NT capability. This powerful architectural
enhancement enables users to build PCIe based systems to support high-
availability, failover, redundant and clustered systems.
High Performance & Low Packet Latency
The PEX8714 architecture supports packet cut-thru with a maximum
latency of 158ns (x4 to x4). This, combined with large packet memory,
flexible common buffer/FC credit pool and non-blocking internal switch
architecture, provides full line rate on all ports for performance-hungry
applications such as servers and switch fabrics. The low latency enables
applications to achieve high throughput and performance. In addition to low
latency, the device supports a packet payload size of up to 2048 bytes,
enabling the user to achieve even higher throughput.
Data Integrity
The PEX8714 provides end-to-end CRC (ECRC) protection and Poison bit
support to enable designs that require end-to-end data integrity. PLX also
supports data path parity and memory (RAM) error correction circuitry
throughout the internal data paths as packets pass through the switch.
Flexible Configuration
The PEX8714’s 5 ports can be configured
to lane widths of x2, x4, or x8. Flexible
buffer allocation, along with the device's
flexible packet flow control, maximizes
throughput for applications where more
traffic flows in the downstream, rather
than upstream, direction. Any port can be
designated as the upstream port, which
can be changed dynamically. Figure 1
shows some of the
PEX8714’s common port configurations
in legacy Single-Host mode.
© PLX Technology, www.plxtech.com
Page 1 of 4
10Sep12; v1.0