MGA-86576 Datasheet, PDF (1/6 Pages) Agilent(Hewlett-Packard) – 1.5 - 8 GHz Low Noise GaAs MMIC Amplifier

MGA-86576
1.5 – 8 GHz Low Noise
GaAs MMIC Amplifier
Data Sheet
Description
Avago’s MGA-86576 is an economical, easy-to-use GaAs
MMIC amplifier that offers low noise and excellent gain
for applications from 1.5 to 8 GHz.
The MGA-86576 may be used without impedance matching
as a high performance 2 dB NF gain block. Alternatively,
with the addition of a simple series inductor at the input, the
device noise figure can be reduced to 1.6 dB at 4 GHz.
The circuit uses state-of-the-art PHEMT technology with
self-biasing current sources, a source-follower interstage,
resistive feedback, and on chip impedance matching
networks.
A patented, on-chip active bias circuit allows operation
from a single +5 V power supply. Cur­rent consumption
is only 16 mA.
These devices are 100% RF tested to assure consistent
performance.
Surface Mount Ceramic Package
Features
• 1.6 dB Noise Figure at 4 GHz
• 23 dB Gain at 4 GHz
• +6 dBm P_1dBat 4 GHz
• Single +5 V Bias Supply
Applications
• LNA or Gain Stage for 2.4 GHz and 5.7 GHz ISM Bands
• Front End Amplifier for GPS Receivers
• LNA or Gain Stage for PCN and MMDS Applications
• C-Band Satellite Receivers
• Broadband Amplifier for Instrumentation
Schematic Diagram
RF
INPUT
1
RF OUTPUT
AND V_d
3
Pin Connectio_Mn_Gs_{A-86576 Pkg}
4
GROUND
RF INPUT
1
RF OUTPUT
AND V_d
3
2
GROUND
MGA-86576 Pin Connection
GROUND 2
GROUND 4
MGA-86576 Schematic
Attention: Observe precautions for
handling electrostatic ­sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.