MGA-81563 Datasheet, PDF (1/11 Pages) Agilent(Hewlett-Packard) – 0.1- 6 GHz 3 V, 14 dBm Amplifier

MGA-81563
0.1–6 GHz 3 V, 14 dBm Amplifier
Data Sheet
Description
Avago’s MGA-81563 is an economical, easy-to-use GaAs
MMIC amplifier that offers excellent power and low noise
figure for applications from 0.1 to 6 GHz. Packaged in
an ultra-miniature SOT-363 package, it requires half the
board space of a SOT-143 package.
The output of the amplifier is matched to 50Ω (better
than 2.1:1 VSWR) across the entire bandwidth. The input is
partially matched to 50Ω (better than 2.5:1 VSWR) below
4 GHz and fully matched to 50Ω (better than 2:1 VSWR)
above. A simple series inductor can be added to the in-
put to improve the input match below 4 GHz. The ampli-
fier allows a wide dynamic range by offering a 2.7 dB NF
coupled with a +27 dBm Output IP .
3
The circuit uses state-of-the-art PHEMT technology
with proven reliability. On-chip bias circuitry allows op-
eration from a single +3 V power supply, while resistive
feedback ensures stability (K>1) over all frequencies and
temperatures.
Features
x Lead-free Option Available
x
+14.8 dBm P at 2.0 GHz
1dB
+17 dBm P at 2.0 GHz
sat
x Single +3V Supply
x 2.8 dB Noise Figure at 2.0 GHz
x 12.4 dB Gain at 2.0 GHz
x Ultra-miniature Package
x Unconditionally Stable
Applications
x Buffer or Driver Amp for PCS, PHS, ISM, SATCOM and
WLL Applications
x High Dynamic Range LNA
Simplified Schematic
Surface Mount Package: SOT-363 (SC-70)
INPUT
OUTPUT
and V_d
6
3
Pin Connections and Package Marking
GND 1
GND 2
INPUT 3
6
OUTPUT
and V_d
5 GND
4 GND
Note: Package marking provides orientation and identification.
"81" = Device Code
"x" = Date code character identifies month of manufacture
BBIIAASS
GND
1, 2, 4, 5
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Human Body Model (Class 0)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.