HSMS-286Y Datasheet, PDF (1/4 Pages) AVAGO TECHNOLOGIES LIMITED – Microwave Schottky Detector Diodes In Surface Mount SOD-523 Package

HSMS-286Y
Microwave Schottky Detector Diodes
In Surface Mount SOD-523 Package
Data Sheet
Description/Applications
The HSMS-286Y of Avago Technologies is a DC biased
detector Diode that designed and optimized for use
from 915MHz to 5.8GHz. They are ideal for RF/ID and
RF Tag applications as well as large signal detection,
modulation, RF to DC conversion or voltage doubling.
The device is housed in a miniature low cost surface
mount SOD-523 package. This miniature package is
particularly useful in the application where board space
is the major concern.
Table 1. Absolute Maximum Ratings ^[1] at Tc = +25°C
Symbol Parameter
Unit Max Rating
P_IV
Peak Inverse Voltage V
4
T_J
Junction Temperature °C
150
T_STG
Storage Temperature °C
-65 to 150
T_OP
Storage Temperature °C
-65 to 150
θjb
Thermal Resistance^[2] °C/W 175
Notes:
1. Operation in excess of any one of these conditions may result in
permanent damage to the device.
2. Thermal Resistance is measured from junction to board using IR
method.
Features
• Space saving SOD-523 package
• High Detection Sensitivity
Up to 50 mW/uW at 915 MHz
Up to 35 mW/uW at 2.45 GHz
Up to 25 mW/uW at 5.80 GHz
• Tape and Reel Options Available
• MSL 1 & Lead Free
Package Marking and Pin Connections
cathode
P?
Anode
Note: Package marking provides orientation and identification
“P” = Device Code
“?” = Month code indicates the month of manufacture
Attention: Observe precautions for handling electrostatic sensitive devices.
ESD Machine Model <30V
ESD Human Body Model =50 V
Refer to Avago Technologies Application Note A004R: Electrostatic Discharge, Damage and Control.