HSMS-285Y Datasheet, PDF (1/4 Pages) AVAGO TECHNOLOGIES LIMITED – Zero Bias Schottky Detector Diodes In Surface Mount SOD-523 Package

HSMS-285Y
Zero Bias Schottky Detector Diodes
In Surface Mount SOD-523 Package
Data Sheet
Description/Applications
The HSMS-285Y of Avago Technologies is a zero bias
Schottky detector diodes that designed and optimized
for use in small signal (Pin < -20 dBm) applications at
frequencies below 1.5 GHz. It is ideal for RF/ID and RF
Tag applications where primary (DC bias) power is not
available.
The device is housed in a miniature low cost surface
mount SOD-523 package. This miniature package is
particularly useful in the application where board space
is the major concern.
Table 1. Absolute Maximum Ratings ^[1] at Tc = +25°C
Symbol Parameter
Unit Max Rating
P_IV
Peak Inverse Voltage V
2.0
T_J
Junction Temperature °C 150
T_STG
Storage Temperature °C
-65 to 150
T_OP
Operating Temperature °C -65 to 150
θjb
Thermal Resistance ^[2] °C/W 175
Notes:
1. Operation in excess of any one of these conditions may result in
permanent damage to the device.
2. Thermal Resistance is measured from junction to board using IR
method.
Features
• Space saving SOD-523 package
• High Detection Sensitivity :
- Up to 50mV/uW at 915 MHz
• Low Flicker Noise :
-162 dBV/Hz at 100 Hz
• Tape and Reel Options Available
• MSL 1 & Lead Free
Package Marking and Pin Connections
cathode
Anode
R?
Note: Package marking provides orientation and identification
“R” = Device Code
“?” = Month code indicates the month of manufacture
Attention: Observe precautions for handling electrostatic sensitive devices.
ESD Machine Model <30V
ESD Human Body Model =200 V
Refer to Avago Technologies Application Note A004R: Electrostatic Discharge, Damage and Control.