HLMP-R100_05 Datasheet, PDF (1/9 Pages) Agilent(Hewlett-Packard) – Agilent 2.5 mm x 7.6 mm Rectangular LED Lamps

Agilent 2.5 mm x 7.6 mm Rectangular
LED Lamps
Data Sheet
HLMP-R100, HLMP-0301, HLMP-0401, HLMP-0504
Description
The HLMP-R100, -0301, -0401,
-0504 are solid state lamps
encapsulated in a radial lead
rectangular epoxy package. They
utilize a tinted, diffused epoxy to
provide high on-off contrast and a
flat high intensity emitting
surface. Borderless package
design allows creation of
uninterrupted light emitting
areas.
The HLMP-0401 provides a yellow
GaAsP on GaP LED chip in a
yellow epoxy package.
The HLMP-0504 provides a green
GaP LED chip in a green epoxy
package.
Package Dimensions
Features
• Rectangular light emitting surface
• Flat high sterance emitting surface
• Stackable on 2.54 mm (0.100 inch)
centers
• Ideal as flush mounted panel
indicators
• Ideal for backlighting legends
• Long life: solid state reliability
• Choice of 4 bright colors
– DH AS AlGaAs Red
– High Efficiency Red
– Yellow
– High Performance Green
• IC compatible/low current
requirements
The HLMP-R100 uses a double
heterojunction (DH) absorbing
substrate (AS) aluminum gallium
arsenide (AlGaAs) red LED chip
in a light red epoxy package. This
combination produces
outstanding light output over a
wide range of drive currents.
The HLMP-0301 has a high
efficiency red GaAsP on GaP LED
chip in a light red epoxy package.
7.62 (0.300)
6.99 (0.275)
7.62 (0.300)
7.11 (0.280)
8.00 (0.315)
7.37 (0.290)
CATHODE LEAD
29.21 (1.15) MIN.
1.27 (0.50)
NOMINAL
2.54 (0.100)
2.16 (0.085)
2.54 (0.100)
2.29 (0.090)
SIDE VIEW
0.46 (0.018)
SQ. NOMINAL
2.54 (0.100)
NOMINAL
BOTTOM VIEW
NOTES:
1. ALL DIMENSIONS ARE IN
MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND
ABOUT 1 mm (0.040") DOWN THE LEADS.
3. THERE IS A MXIMUM 1° TAPER FROM
BASE TO THE TOP OF LAMP.