|
HLMP-PM00-N0000 Datasheet, PDF (1/7 Pages) AVAGO TECHNOLOGIES LIMITED – Subminiature Blue and Green InGaN LED Lamps | |||
|
HLMP-PB00-N0000/HLMP-PM00-N0000
HLMP-QB00-S0000/HLMP-QM00-S0000
Subminiature Blue and Green InGaN LED Lamps
Data Sheet
Description
Flat Top Package
The HLMP-Pxxx ï¬at top lamps use an untinted, nondif-
fused, truncated lens to provide a wide radiation pattern
that is necessary for use in backlighting applications. The
ï¬at top lamps are also ideal for use as emitters in light
pipe applications.
Dome Package
The HLMP-Qxxx dome lamps use an untinted, nondif-
fused lens to provide a high luminous intensity within a
narrow radiation pattern.
Lead Conï¬gurations
All these devices are made by encapsulating LED chip
on axial lead frames to form molded epoxy submini-
ature lamps. A variety of package conï¬guration options
is available. These include special surface mount lead
conï¬gurations, gull wing, yoke lead, or Z-bend. Right
angle lead bend at 2.54 mm (0.100 inch) and 5.08 mm
(0.200 inch) center spacing are available for through hole
mounting. For more information refer to Standard SMT
and Through Hole Lead Bend Options for Subminiature
Lamps data sheet.
Features
x Subminiature ï¬at top package
Ideal for backlighting and light piping applications
x Subminiature dome package
Nondiï¬used dome for high brightness
x Colors: 468 nm blue, 525 nm green
x Ideal for space limited applications
x Axial leads
x Available with lead conï¬gurations for surface mount
and through hole PC board mounting
Applications
x Consumer
x Industrial
x Computer peripheral
x Communication
CAUTION: HLMP-xB00 and HLMP-xM00 LEDs are Class 2 ESD sensitive. Please observe appropriate precau-
tions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
|
▷ |