HLMP-P205 Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps

Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S
Standard SMT and Through Hole Lead Bend Options
for Subminiature LED Lamps
Data Sheet
Description
Subminiature lamps (HLMX-PXXX, HLMX-QXXX, HLMP-
6XXX, HLMP-70XX) are available with the above standard
options. Subminiature Lamps with Options 11, 12, 21, 22,
31, and 32 are suitable for surface mount applications
and their leads are formed with gull wing, yoke bend and
Z bend respectively. They are available in Tape and Reel
(compatible to ANSI/EIA RS-481) or bulk. Options 1L, 1S,
2L, and 2S are right angle lead bends suitable for through
hole applications.
Features
• Surface mount lead configurations
• Right angle lead bend for through hole mounting
• Tape and reel in accordance with ANSI/EIA RS-481
specifications
Ordering Information
To order Subminiature Lamps packaged with these stan-
dard options, include the appropriate option code along
with the device catalog part number. Example: to order the
HLMP-6300-F00xx with Option 11 gull wing leads in 12 mm
embossed tape on 178 mm (7 inch) diameter reels, with
1500 lamps per reel; order as follows: HLMP-6300-F0011.
Order quantities must be placed in reel increments only.
Orders for partial reels will not be accepted. For additional
informa­tion, please contact your local Avago Technologies
sales office or franchised distributor for assistance.
HLMX-XXXX-X X X X X
Packaging Option
Color Bin Selection
Max. Iv Bin
Min. Iv Bin
4 x 4 Prod. Part Number