HLMP-K150-CD000 Datasheet, PDF (1/9 Pages) AVAGO TECHNOLOGIES LIMITED – Minimum luminous intensity specified at 1 mA

HLMP-D150, HLMP-D155, HLMP-K150 and HLMP-K155
T-13/4 (5 mm), T-1 (3 mm), Low Current,
Double Heterojunction AlGaAs Red LED Lamps
Data Sheet
Description
These solid state LED lamps utilize double heterojunction
(DH) AlGaAs/GaAs material technology. This LED material
has outstanding light output efficiency at very low drive
currents. The color is deep red at the dominant wave-
length of 637 nanometres. These lamps are ideally suited
for use in applications where high light output is required
with minimum power output.
Applications
• Low power circuits
• Battery powered equipment
• Telecommunication indicators
Package Dimensions
Features
• Minimum luminous intensity specified at 1 mA
• High light output at low currents
• Wide viewing angle
• Outstanding material efficiency
• Low power/low forward voltage
• CMOS/MOS compatible
• TTL compatible
• Deep red color
9.19 (0.362)
8.43 (0.332)
CATHODE
25.40 (1.00)
MINIMUM
5.08 (0.200)
4.57 (0.180)
0.89 (0.035)
0.64 (0.025)
0.65 (0.026) MAX.
12.44 (0.490)
11.68 (0.460)
23.0 _MIN.
(0.90)
5.08 (0.200)
4.57 (0.180)
0.89 (0.035) ^{9.19 (0.362)}
0.64 (0.025) ^{8.43 (0.332)}
1.14 (.045)
0.51 (.020)
1.32 (0.052)
1.02 (0.040)
0.46 (0.018)
SQUARE NOMINAL
24.1(.95) min.
Ø
3.17
2.67
(.125)
(.105)
3.43 (.135)
2.92 (.115)
4.70 (.185)
4.19 (.165)
6.35 (.250)
5.58 (.220)
0.65 (0.026) max.
1.27(0.050)
NOM.
2.54 (0.100) NOM.
0.55 (0.022)
0.40 (0.016)
SQ. TYP.
1.27 (0.050)
NOM.
6.10 (0.240)
5.59 (0.220)
CATHODE
6.1 (0.240)
5.6 (0.220)
2.54 (0.100)
NOM.
A.
B.
Notes:
1. All dimensions are in mm (inches).
2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.
3. For PCB hole recommendations, see the Precautions section.
1.52 (.060)
1.02 (.040)
2.79 (.110)
2.29 (.090)
(0.022) 0.55 _{SQ. TYP.}
(0.016) 0.40
C.