HLMP-DL50 Datasheet, PDF (1/4 Pages) AVAGO TECHNOLOGIES LIMITED – T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps for Variable Message Signs

HLMP-DL50
T-1³/₄ (5 mm) Precision Optical Performance AlInGaP
LED Lamps for Variable Message Signs
Data Sheet
Device Selection Guide
Part Number
HLMP-
DL50
DL51
Typical Viewing
Angle 2q_1/2
(Deg.)
15
15
Dominant
Wavelength Range
586.5 to 590.5 nm
588.5 to 592.5 nm
Note:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
Luminous Intensity
(mcd at I_F = 20 mA)^[1]
4200 to 7200
4200 to 7200
Package Dimensions^[2]
1.14 ± 0.20
(0.045 ± 0.008)
5.00 ± 0.20 _{NOTE 1}
(0.197 ± 0.008)
2.35 _MAX.
(0.093)
0.70
(0.028)
MAX.
NOTE:
1. MEASURED JUST ABOVE FLANGE.
0.50
(0.030
±
±
00..01004)SQ.
TYP.
5.90 ± 0.20
(0.228 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
CATHODE LEAD
31.60
(1.244)
MIN.
Note:
2. This part is only offered in a flanged package without stand-offs.
1.00 _MIN.
(0.039)
CATHODE
2.54 ± 0.38
(0.100 ± 0.15)
Absolute Maximum Ratings at T_A = 25°C
Parameter
Value
DC Forward Current^{[3, 4]}l
50 mA
Peak Pulsed Forward Current^{[3, 4]}l
100 mA
Average Forward Current^[4]l
30 mA
Reverse Voltage (I_R = 100 µA)
LED Junction Temperature
Operating Temperature
Storage Temperature
5V
130°C
- 40°C to +100°C
- 40°C to +120°C
Notes:
3. For long term performance with minimal light output degradation, drive currents between 10 and
30 mA are recommended.
4. Please contact your sales representative about operating currents below 10 mA.