HLMP-D105 Datasheet, PDF (1/8 Pages) AVAGO TECHNOLOGIES LIMITED – High Intensity, Double Heterojunction AlGaAs Red LED Lamps

HLMP-D101/D105, HLMP-K101/K105
T-1³/₄ (5 mm), T-1 (3 mm),
High Intensity, Double Heterojunction
AlGaAs Red LED Lamps
Data Sheet
Description
These solid-state LED lamps utilize newly developed
double heterojunction (DH) AlGaAs/GaAs material tech-
nology. This LED material has outstanding light output
efficiency over a wide range of drive currents. The color is
deep red at the dominant wavelength of 637 nanometers.
These lamps may be DC or pulse driven to achieve desired
light output.
Features
• Exceptional brightness
• Wide viewing angle
• Outstanding material efficiency
• Low forward voltage
• CMOS/MOS compatible
• TTL compatible
• Deep red color
Package Dimensions
6.10 (0.240)
5.59 (0.220)
0.89 (0.035)
0.64 (0.025)
5.08 (0.200)
4.57 (0.180)
Applications
• Bright ambient lighting conditions
• Moving message panels
• Portable equipment
• General use
0.65 (0.026) max
SQUARE TYP.
0.55 (0.022)
0.40 (0.016)
12.44 (0.490)
11.68 (0.460)
5.08 (0.200)
4.57 (0.180)
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
2.54 (0.100) NOM.
9.19 (0.362)
8.43 (0.332)
A
CATHODE LEAD
25.40(1.00)
MINIMUM
1.14 (.045)
0.51 (.020)
3.43 (.135)
2.92 (.115)
24.1(.95) MIN.
0.65 (0.026) max.
1.52 (.060)
1.02 (.040)
Ø ^{3.17 (.125)}
2.67 (.105)
4.70 (.185)
4.19 (.165)
(0.022) 0.55 _{SQ. TYP.}
(0.016) 0.40
6.35 (.250)
5.58 (.220)
C
Notes:
1. All dimensions are in mm (inches).
2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.
3. For PCB hole recommendations, see the Precautions section.
1.27(0.050)
NOM.
2.79 (.110)
2.29 (.090)
23.0
(0.90)
MIN.
1.32 (0.052)
1.02 (0.040)
0.46 (0.018)
SQUARE NOMINAL
1.27 (0.050)
NOM.
CATHODE
6.1 (0.240)
5.6 (0.220)
2.54 (0.100)
NOM.
B