HLMP-6620-F001S Datasheet, PDF (1/16 Pages) AVAGO TECHNOLOGIES LIMITED – Subminiature LED Lamps

HLMP-Pxxx Series, HLMP-Qxxx Series
HLMP-6xxx Series, HLMP-70xx Series
Subminiature LED Lamps
Data Sheet
Description
Flat Top Package
The HLMP-Pxxx Series flat top lamps use an untinted, non-
diffused, truncated lens to provide a wide radiation pat-
tern that is necessary for use in backlighting applications.
The flat top lamps are also ideal for use as emitters in light
pipe applications.
Dome Packages
The HLMP-6xxx Series dome lamps for use as indicators
use a tinted, diffused lens to provide a wide viewing angle
with a high on-off contrast ratio. High brightness lamps
use an untinted, nondiffused lens to provide a high lumi-
nous intensity within a narrow radiation pattern.
Resistor Lamps
The HLMP-6xxx Series 5 volt subminiature lamps with
built in current limiting resistors are for use in applications
where space is at a premium.
Lead Configurations
All of these devices are made by encapsulating LED chips
on axial lead frames to form molded epoxy subminiature
lamp packages. A variety of package configuration op-
tions is available. These include special surface mount
lead configurations, gull wing, yoke lead or Z-bend. Right
angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm
(0.200 inch) center spacing are available for through hole
mounting. For more information refer to Standard SMT
and Through Hole Lead Bend Options for Subminiature
LED Lamps data sheet.
Features
 Subminiature flat top package
– ideal for backlighting and light piping applications
 Subminiature dome package
– diffused dome for wide viewing angle
– nondiffused dome for high brightness
 TTL and LSTTL compatible 5 volt resistor lamps
 Available in six colors
 Ideal for space limited applications
 Axial leads
 Available with lead configurations for surface mount
and through hole PC board mounting