HLMP-1600_07 Datasheet, PDF (1/9 Pages) AVAGO TECHNOLOGIES LIMITED – T-13/4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt Integrated Resistor LED Lamps

HLMP-1600
T-1³/₄ (5 mm),T-1 (3 mm),5Volt,12 Volt,
Integrated Resistor LED Lamps
Data Sheet
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621
HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601
HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
Description
The 5 volt and 12 volt series lamps contain an
integral current limiting resistor in series with the
LED. This allows the lamp to be driven from a 5 volt/
12 volt source without an external current limiter.
The red LEDs are made from GaAsP on a GaAs
substrate. The High Efficiency Red and Yellow
devices use GaAsP on a GaP substrate.
The green devices use GaP on a GaP substrate. The
diffused lamps provide a wide off-axis viewing angle.
The T-1³/₄ lamps are provided with sturdy leads
suitable for wire wrap applications. The T-1³/₄ lamps
may be front panel mounted by using the HLMP-0103
clip and ring.
Features
• Integral current limiting resistor
• TTL compatible
Requires no external current Limiter with 5 volt/12 volt
supply
• Cost effective
Saves space and resistor cost
• Wide viewing angle
• Available in all colors
Red, High Efficiency Red, Yellow, and High Performance
Green in T-1 and T-1³/₄ packages
Package Dimensions
3.43 (0.135)
2.92 (0.115)
3.18 (0.125)
2.67 (0.105)
6.35 (0.250)
5.58 (0.220)
4.70 (0.185)
4.19 (0.165)
0.65 (0.026)
MAX.
(204.9.153)MIN.
CATHODE
1.02 (0.040)
NOM.
0.45 (0.018)
SQUARE NOM.
11.56 (0.455)
10.80 (0.425)
5.08 (0.200)
4.57 (0.180)
9.19 (0.362)
0.89 (0.035) ^{8.43 (0.332)}
0.64 (0.025)
(203.9.00)MIN.
1.32 (0.052)
1.02 (0.040)
0.64 (0.025)
SQUARE NOMINAL
1.27 (0.050)
NOM.
2.54 (0.100) NOM.
Figure A. T-1 package.
1.27 (0.050)
NOM.
6.1 (0.240)
5.6 (0.220)
CATHODE
2.54 (0.100)
NOM.
Figure B. T-1³/₄ package.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm (0.040") DOWN THE LEADS.