HLMP-1600 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – T-13/4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps

HLMP-1600
T‑1³/₄ (5 mm), T-1 (3 mm), 5 Volt, 12 Volt,
Integrated Resistor LED Lamps
Data Sheet
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621
HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601
HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
Description
The 5 volt and 12 volt series lamps contain an integral
cur­rent limiting resistor in series with the LED. This allows
the lamp to be driven from a 5 volt/12 volt source without
an external current limiter. The red LEDs are made from
GaAsP on a GaAs substrate. The High Efficiency Red and
Yellow devices use GaAsP on a GaP substrate.
The green devices use GaP on a GaP substrate. The diffused
lamps provide a wide off-axis viewing angle.
The T-1³/₄ lamps are provided with sturdy leads suitable
for wire wrap applications. The T‑1³/₄ lamps may be front
panel mounted by using the HLMP-0103 clip and ring.
Features
• Integral current limiting resistor
• TTL compatible
Requires no external current Limiter with 5 volt/12 volt
supply
• Cost effective
Saves space and resistor cost
• Wide viewing angle
• Available in all colors
Red, High Efficiency Red, Yellow, and High Performance
Green in T-1 and T‑13/4 packages
Package Dimensions
1.14 (.045)
0.51 (.020)
3.43 (.135)
2.92 (.115)
Ø ^{3.17 (.125)}
2.67 (.105)
4.70 (.185)
4.19 (.165)
6.35 (.250)
5.58 (.220)
Figure A. T-1 package.
24.1(.95) MIN.
0.65 (0.026) max.
1.52 (.060)
1.02 (.040)
(0.022) 0.55 _{SQ. TYP.}
(0.016) 0.40
Notes:
1. All dimensions are in mm (inches).
2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.
3. For PCB hole recommendations, see the Precautions section.
2.79 (.110)
2.29 (.090)
11.56 (0.455)
10.80 (0.425)
5.08 (0.200)
4.57 (0.180)
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
23.0
(0.90)
MIN.
1.32 (0.052)
1.02 (0.040)
0.64 (0.025)
SQUARE NOMINAL
1.27 (0.050)
NOM.
CATHODE
Figure B. T-1³/₄ package.
6.1 (0.240)
5.6 (0.220)
2.54 (0.100)
NOM.