HLMA-SH05 Datasheet, PDF (1/3 Pages) Agilent(Hewlett-Packard) – 2 mm x 5 mm Rectangular AlInGaP Lamps

HLMA-SH05
2 mm x 5 mm Rectangular
AlInGaP Lamps
Data Sheet
Description
The HLMA-SH05 is an epoxy encapsulated lamp in
rectangular package which are easily stacked in arrays or
used for discrete front panel indi­cators. Contrast and light
uniformity are enhanced by a special epoxy diffusion and
tinting process.
Technology
This 2x5 rectangular solid state lamp utilizes the newly
developed Aluminum Indium Gallium Phosphide
(AlInGaP) LED technology. This material has a very high
luminous efficiency, capable of producing high light
output over a wide range of drive currents.
Device Selection Guide
Package
Description
Rectangular,
2mm x 5 mm,
Tinted, Diffused
Viewing Angle
2q_1/2
110
Dominant
Wavelength
615 nm
Features
• Rectangular light emitting surface
• Excellent for flush mounting on panels
• Long life: solid state reliability
• Excellent uniformity of light output
Package Dimensions
5.18 (0.204)
4.93 (0.194)
5.46 (0.215)
4.95 (0.195)
CATHODE
LEAD
26.40 (1.00)
MIN.
1.27 (0.060)
NOMINAL
8.00 (0.315)
7.37 (0.290)
2.23 (0.088)
1.98 (0.078)
SIDE VIEW
2.41 (0.095)
2.03 (0.085)
0.46 (0.018) SQ.
NOMINAL
2.54 (0.100)
NOMINAL
BOTTOM VIEW
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm (0.040") DOWN THE LEADS.
3. THERE IS A MAXIMUM 1° TAPER FROM
BASE TO THE TOP OF LAMP.
HLMA-SXD5 pkg dimen