|
HFBR-7934Z Datasheet, PDF (1/18 Pages) AVAGO TECHNOLOGIES LIMITED – Four-Channel Pluggable Parallel Fiber Optic Transceiver | |||
|
HFBR-7934Z and HFBR-7934EZ/HZ/EHZ
Four-Channel Pluggable Parallel Fiber Optic Transceiver
Data Sheet
Description
The HFBR-7934Z transceiver is a high
performance fiber optic module for parallel
optical data communication applications. It
incorporates 8 independent data channels (4
for transmit and 4 for receive) operating from
1 to 3.125 Gb/s 8B/10B encoded per channel
providing a cost effective solution for very
short reach applications requiring 12.5 Gb/s
aggregate bandwidth. The module is designed
to operate on multimode fiber systems at a
nominal wavelength of 850 nm. It incorporates
high performance, highly reliable, short
wavelength optical devices coupled with proven
circuit technology to provide long life and
consistent service.
The HFBR-7934Z transceiver module incorporates
a 4 channel VCSEL (Vertical Cavity Surface
Emitting Laser) array together with a custom
4 channel laser driver integrated circuit providing
IEC-825 and CDRH Class 1M laser eye safety.
It also contains a 4 channel PIN photodiode
array coupled with a custom preamplifier /
post amplifier integrated circuit.
Operating on 3.3 V power supply this module
provides LVTTL/LVCMOS control interfaces and
CML compatible high speed data lines which
simplify external circuitry. The transceiver is
housed in MTP®/MPO receptacled package with
integral finned heatsink. Electrical connections
to the device are achieved by means of a
pluggable 10x10 connector array.
Features
⢠RoHS Compliant
⢠Four Transmit and Four Receive Channels; 1 to 3.125
Gb/s 8B/10B encoded per channel
⢠Compatible with SONET scrambled and 8B10B encoded
data formats
⢠850 nm VCSEL array source
⢠Conforms to âPOP4â Four-Channel Pluggable Optical
Transceiver Multisource Agreement
⢠50/125 µm multimode fiber operation
⢠Distance up to 150 m with
500 MHz.km fiber at 3.125 Gb/s
⢠Distance up to 350 m with
2000 MHz.km fiber at 3.125 Gb/s
⢠Pluggable package
⢠Outputs (Tx & Rx) are squelched for loss of signal
⢠Control I/O is compatible with LVTTL and LVCMOS
⢠Standard MTP® MPO ribbon fiber connector interface
⢠Integrated heat sink
⢠Manufactured in an ISO 9002 certified facility
⢠Rx Signal Detect
Applications
⢠Telecom and Datacom Switch/Router Rack-to-Rack
Connections
⢠Computer Cluster Interconnects
|
▷ |