|
HFBR-1525EZ Datasheet, PDF (1/7 Pages) AVAGO TECHNOLOGIES LIMITED – 12 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 μm HCS® | |||
|
HFBR-1525EZ Transmitter
HFBR-2525EZ Receiver
12 Megabaud Versatile Link Fiber Optic Transmitter
and Receiver for 1 mm POF and 200 μm HCS®
Data Sheet
Description
The HFBR-1525EZ transmitter is an LED in a low cost
plastic housing designed to efficiently couple power
into 200 μm diameter Hard Clad Silica (HCSï) and 1 mm
diameter Plastic optical fiber (POF). The HFBR-2525EZ re-
ceiver incorporates a PIN detector and digital output IC
compatible with CMOS and TTL logic families.
HFBR-1525EZ/HFBR-2525EZ links operate from DC to 12
MBd at distances up to 50 meters with 1 mm POF and up
to 500 meters with 200 μm HCSï. No minimum link dis-
tances are required when using recommended circuits,
simplifying design.
Versatile Link components can be interlocked (N-plexed
together) to minimize space and to provide dual connec-
tions with the duplex connectors. Up to eight packages
can be interlocked and inserted into a printed circuit
board.
POF and HCSï are available in pre-connectored lengths
or can be easily field-terminated. A single transmitter
drive current for POF and HCSï allows both fibers to be
used with a single design.
Features
ï· RoHS-compliant
ï· Data transmission at signal rates of dc to 12 MBd
ï· Up to 50 meters distances with 1 mm Plastic Optical
Fiber (POF)
ï· Up to 500 meters distances with 200 μm Hard Clad
Silica (HCSï)
ï· Wide dynamic range receiver allows operation from
zero to maximum link distance with a single transmit-
ter drive current
ï· Link distances specified for variations in temperature,
power supply, and fiber attenuation
ï· DC coupled receiver with CMOS/TTL output for easy
designs: No data encoding or digitizing circuitry re-
quired
ï· Pulse width distortion (PWD) controlled to limit dis-
tortion from low duty cycle or burst mode data
ï· High noise immunity
ï· Compatible with Avagoâs versatile link family of con-
nectors, for easy termination of fiber
Applications
ï· Industrial control and factory automation
ï· Serial field buses
ï· Intra-system links; board-to-board, rack-to-rack
ï· Extension of RS-232, RS-485
ï· Elimination of ground loops
ï· High voltage isolation
ï· Reduces voltage transient susceptibility
HCSï is a registered trademark of OFS.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of
these components to prevent damage and/or degradation which may be induced by ESD.
|
▷ |